期刊文献+

刚性约束时间对焊接残余角变形的影响 被引量:1

Influence of Rigid Constraint Time on Welding Residual Distortion
原文传递
导出
摘要 通过对低碳钢对接接头残余角变形量进行数据采集,得到了残余焊接角变形量与不同刚性约束时间的关系曲线,并进行了分析。认为:在焊接过程中,刚性约束对减小残余角变形量效果明显;随着刚性约束时间的增加,焊接残余角变形量明显减小;当焊接电弧熄灭后,继续增加刚性约束时间对减小残余角变形量没有明显效果。 The data collections of residual angular distortion of butt joint of low-carbon steel were carried out. The relation curve between residual angular distortion and different time of rigid constraint was obtained. The results show that the influence of rigid constraint on the reduced residual angular distortion is obvious in the process of welding. With the increase of constraints time, the welding residual distortion decreases. When the welding arc is extinguished, the residual angular distortion does not change much if continuing to increase the time of rigid constraint.
出处 《热加工工艺》 CSCD 北大核心 2015年第5期204-205,共2页 Hot Working Technology
关键词 对接接头 刚性约束 残余角变形 butt joint rigid constraint residual angular distortion
  • 相关文献

参考文献3

二级参考文献17

  • 1Kiyoshima S, Quick Welder User,s Manual [M]. Research Center of Computational Mechanics Inc., Tokyo, 2005:23.
  • 2Kiyoshima S, Deng Dean, Ogawa K, et al. Influences of heat source model on welding residual stress and distortion in amulti-pass J-groove joint [J]. Comput Mater Sci., 2009, 46: 987-995.
  • 3Kermanpur A, Shamanian M, Yeganeh V. Three-dimensional thermal simulation and experi- mental investigation of GTAW circumferentially butt-welded ln- coloy 800 pipes [J]. J. Mater. Proc.Tech., 2008,199:295-303.
  • 4Zuo D W,Wang H F,Miao H,et al.Analysis on millingdeformation of 7022 aluminum alloy blank jointed by FSJ[J].Key Engineering Materials,2012,499:27-32.
  • 5Garcfa-Allende P B,Mirapeix J,Conde O M,et al.Spectralprocessing technique based on feature selection and artificialneural networks for arc-welding quality monitoring [J].NDT&E International,2009,42:56-63.
  • 6Rakesh Kumar,Ulrich Dilthey,Dwivedi D K,et al.Thinsheet welding of Al 6082 alloy by AC pulse-GMA and ACwave pulse-GMA welding [J].Materials and Design,2009,30:306-313.
  • 7董文超,陆善平,李殿中,李依依.微量活性组元氧对焊接熔池Marangoni对流和熔池形貌影响的数值模拟[J].金属学报,2008,44(2):249-256. 被引量:41
  • 8姚屏,薛家祥,黄文超,蒙万俊.脉冲MIG焊熔滴过渡阶段的波形控制[J].华南理工大学学报(自然科学版),2009,37(4):52-56. 被引量:17
  • 9陈礼清,隋凤利,刘相华.Inconel 718合金方坯粗轧加热过程晶粒长大模型[J].金属学报,2009,45(10):1242-1248. 被引量:37
  • 10郭彦兵,童彦刚,贺晓娜.低合金钢薄板件TIG焊接温度场三维有限元模拟[J].热加工工艺,2010,39(21):158-160. 被引量:7

共引文献15

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部