期刊文献+

结合部对HSK主轴系统动态特性的影响 被引量:1

Effects of Joint Part on HSK Spindle System Dynamic Performance
下载PDF
导出
摘要 根据HSK主轴系统的工作原理,在ANSYS软件中建立了HSK主轴系统的动力学模型。其中,各结合部都简化为均布弹簧单元,各部件简化为多段梁,并使用Timoshenko梁理论和有限元理论系统分析结合部对HSK主轴系统动态特性的影响。模态实验和有限元分析结果对比证实了Timoshenko梁理论分析HSK主轴系统动力学模型动态特性的可行性和有效性。提出结合部对主轴系统各阶模态影响的研究思路,并利用ANSYS有限元软件中的谐响应分析模块,分别研究了轴承-主轴、主轴-刀柄和刀柄-刀具各结合部对HSK主轴-热装刀柄-刀具系统刀尖点频响函数的影响,提出了相应的抗振措施。 According to the working principles of HSK spindle system,a FEM (finite element method)dynamic model of HSK spindle system was built in ANSYS software,the joint parts were simplified as spring element and the parts were simplified as multi-parts beam.The dynamic perform-ance of HSK spindle system was analyzed with Timoshenko beam theory and FEM,and the modal ex-periments were made in HSK tooling system.The Timoshenko theory for analyzing dynamic per-formance of HSK spindle system was proved to be feasible,compared with modal results.At last, the joint parts affecting HSK spindle system tool point frequency response were studied,some anti-vi-bration solutions were proposed.
出处 《中国机械工程》 EI CAS CSCD 北大核心 2015年第9期1161-1166,共6页 China Mechanical Engineering
基金 国家科技重大专项(2013ZX04009031) 国家自然科学基金资助项目(51075192 51275217) 江苏省博士创新计划资助项目(CXZZ13_0656) 南通市精密加工技术重点实验室资助项目(CP12014002)
关键词 结合部 HSK主轴系统 TIMOSHENKO梁 动态特性 joint part HSK spindle system Timoshenko beam dynamic performance
  • 相关文献

参考文献11

  • 1Schmitz T, Duncan G. Three-component Recep- tance Coupling Substructure Analysis for Tool Point Dynamics Prediction[J]. Journal of Manufacturing Science and Engineering, 2005,127(12) : 781-790.
  • 2Schmitz T, Powell K, Won D, et al. Shrink Fit Tool Holder Connection Stiffness/Damping Modeling for Frequency Response Prediction in Milling[J]. Interna- tional Journal of Machine Tools ~ Manufacture, 2007, 47: 1368-1380.
  • 3Park S, Altintas Y, Movahhedy M. Receptance Cou- pling for End Mills[J]. International Journal of Ma- chine Tools ~ Manufacture, 2003,43: 889-896.
  • 4Namazia M, Altintasa Y, Abeb T, et al. Modeling and Identification of Tool Holder-spindle Interface Dynamics [J]. International Journal of Machine Tools ~ Manufacture, 2007,47: 1333-1341.
  • 5闫蓉,蔡飞飞,彭芳瑜,汪勇.基于响应耦合方法的铣刀刀尖点频响函数预测[J].华中科技大学学报(自然科学版),2013,41(4):1-5. 被引量:18
  • 6Erttirk A, Budak E. Effect Analysis of Bearing and Interface Dynamics on Tool Point FRF for Chatter Stability in Machine Tools by Using a New Analyti- cal Model for Spindle-tool Assemhlies[J]. Interna- tional Journal of Machine Tools g~ Manufacture, 2007,47 (1) ,23-32.
  • 7Budak E, Erttirk A, CIzgtiven H N. A Modeling Approach for Analysis and Improvement of Spindle- holder-tool Assembly Dynamics[J]. Annals of the CIRP, 2006,56(1) :155-160.
  • 8汪博,孙伟,闻邦椿.考虑主轴—刀柄—刀具结合面的高速主轴系统动力学特性有限元建模[J].机械工程学报,2012,48(15):83-89. 被引量:15
  • 9赵万华,杜超,张俊,刘海涛.主轴转子系统动力学解析建模方法[J].机械工程学报,2013,49(6):44-51. 被引量:20
  • 10楼梦麟,任志刚.Timoshenko简支梁的振动模态特性精确解[J].同济大学学报(自然科学版),2002,30(8):911-915. 被引量:19

二级参考文献44

  • 1李松生,陈晓阳,张钢,王春兰,杨柳欣,陈长江.超高速时电主轴轴承的动态支承刚度分析[J].机械工程学报,2006,42(11):60-65. 被引量:58
  • 2楼梦麟.变参数土层的动力特性和地震反应分析[J].同济大学学报(自然科学版),1997,25(2):155-160. 被引量:15
  • 3铁木辛柯S 胡人礼.工程中的振动问题[M].北京:人民铁道出版社,1978..
  • 4Altintas Yusuf.数控技术与制造自动化[M].北京:化学工业出版社,2002
  • 5ERTURK A, OZGUVEN H N, BUDAK E. Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a newanalytical model for spindle-tool assemblies[J]. International Journal of Machine Tools and Manufacture, 2007(47): 23-32.
  • 6RANTATALO M, AIDANPAA J O, GORANSSON B, et al. Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement[J]. International Journal of Machine Tools &Manufacture, 2007, 47- 1034-1045.
  • 7CAO Yuzhong, ALTINTAS Y. A general method for the modeling of spindle-bearing systems[J]. Journal of Mechanical Design, 2004, 126(6): 1089-1104.
  • 8LIN Chiwei, TU J F, KAMMAN J. All integrated thermo-mechanical-dynamic model to characterize motorized machine tool spindles during very high speed rotation[J]. International Journal of Machine Tools & Manufacture, 2003(43): 1035-1050.
  • 9LI Hongqi, SHIN Y C. Analysis of bearing configuration effects on high speed spindles using an integrated dynamic thermo-mechanical spindle model[J]. International Journal of Machine Tools & Manufacture, 2004, 44. 347-364.
  • 10ALTINTAS Y, CAO Yuzhong. Virtual design and optimization of machine tool spindles[J]. CIRP Annals, Manufacturing Technology , 2005, 54: 379-382.

共引文献66

同被引文献5

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部