期刊文献+

大尺度内嵌柱型风帽阻力特性数值模拟分析 被引量:3

Numerical and Experimental Investigation of Flow Resistance Characteristics in Large-scale Caps with Inner Tubes and Down-flow
原文传递
导出
摘要 基于超临界循环流化床锅炉原型风帽,结合冷态试验与数值模拟分析,综合考察了风帽局部阻力分配特性、风帽小孔布置方式、风帽小孔旋转角度和下倾角度对风帽阻力的影响规律。计算结果表明,在风帽局部(芯管、风帽头小孔、缝隙综合区、芯管小孔)阻力分配中,芯管小孔阻力占据了整个风帽阻力的70%以上;芯管小孔的布置方式对风帽阻力的影响不大;风帽阻力随小孔旋转角度的增大而增加,随小孔下倾角度的增加呈先增大后减小的趋势,对比分析可知将小孔旋转30°同时下倾15°是一个较佳的设计。 The cold flow resistance characteristics in an air caps of a supercritical circulation fluidized bed (CFB) boiler were investigated based on CFD simulation combined pressure measurement. The effect of caps geometrical parameters (i.e. the hole arrangement, hole rotation angle and hole downdip angle) on the resistance characteristics were analyzed based on CFD simulation and measurement. The results indicate that more than seventy percent of the resistance is from the small holes of the inner tube among the five local resistances (inner tube, small holes at the head, annular gap, turning position and small holes of the inner tube). The results also indicate that the effect of the arrangement of holes in the inner tube can be neglected. The resistance decreases with the increase in the hole rotation angle. The effect of hole downdip angle is more complex compared with the rotation angle and the resistance firstly increases and then decreases. Based on above analysis, the best optimized caps design is to down-dip the holes to 15 degrees while rotate which by 30 degrees.
出处 《电站系统工程》 2015年第3期22-24,27,共4页 Power System Engineering
基金 中国科学院战略性先导科技专项(XDA07030100)资助 国家国际科技合作专项(2014DFG61680)资助
关键词 大尺度 内嵌逆流柱型风帽 阻力特性 数值模拟 large-scale air caps with inner tube and down-flow resistance characteristics numerical
  • 相关文献

参考文献13

二级参考文献45

  • 1骆仲泱,何宏舟,王勤辉,岑可法.循环流化床锅炉技术的现状及发展前景[J].动力工程,2004,24(6):761-767. 被引量:97
  • 2赵弦,包绍麟,贺军.内嵌逆流柱形风帽的冷态模化试验和三维流场的数值模拟[J].锅炉技术,2005,36(3):32-37. 被引量:11
  • 3程乐鸣,王勤辉,施正伦,方梦祥,骆仲泱,倪明江,岑可法.大型循环流化床锅炉中的传热[J].动力工程,2006,26(3):305-310. 被引量:18
  • 4Bursi JM, Lafanechere L, Jestin L. Basic design studies for a 600 MW CFB boiler (270 bar, 2 × 600℃ ) [C] //Circulating Fluidized Technology. Germany: J Werther Wurzhning, 1999 : 913- 916.
  • 5DOE, JEA. The JEA large-scale CFB combustion demonstration project[R]. The U. S. Department of Energy and JEA, Report No.: 22. 2003.
  • 6Goidich SJ, Wu S, Fan Z. Design aspects of the uhra-supercritical CFB boiler [C]//Inter. Pittsburgh Coal Conf. Pittsburgh, USA,2005.
  • 7Venalainen I. 460 MW supercritical CFB boiler design for Lagisza power plant [C]//POWER-GEN Europe 2004. Barcelona, Spain, 2004.
  • 8Goidich SJ, Fan Z, Sippu O, et al. Integration of ultra-supercritical OTU and CFB boiler technologies [C]//19th Inter. Conf. on FBC. Vienna, Austria,2006.
  • 9吕俊复.超临界循环流化床锅炉水冷壁热负荷及水动力研究[D].北京:清华大学热能工程系,2004.
  • 10吕清刚,宋国良,孙运凯,等.自助研发超临界循环流化床锅炉技术[C]//全国电力行业CFB机组技术交流服务协作网第六届年会技术交流论文集.海南海口,2007:56-67.

共引文献188

同被引文献23

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部