摘要
为明确燕麦需肥规律、探索吉林省白城地区皮燕麦最佳施肥量,以白燕7号皮燕麦品种为材料,依照“3414”试验设计原则,设置了氮磷钾三种肥料各4个梯度共14个处理,于2012-2013年定位研究不同施肥量对燕麦子粒产量的影响,并运用不同模型对结果进行分析。2年的大田试验结果表明,通过三元二次方程拟合得出N、P和K肥的推荐施用量分别为90、50和35kg/hm^2(纯量,下同),燕麦子粒产量约为2 800-3 000kg/hm^2;一元二次方程拟合结果表明,N、P和K肥推荐施用量分别为100、40、30kg/hm^2,燕麦子粒产量介于2 800-3 150kg/hm^2;通过经济效益分析得出,N、P、K施用量分别为90、45、0kg/hm^2时经济效益最高,为6 100-6 300元/hm^2。综合不同模型研究结果,白城地区白燕7号皮燕麦生产中,N肥的推荐施用量为90kg/hm^2,P肥的推荐施用量为40-50kg/hm^2,K肥可以不施或低量施用。
The objective of this paper was to clarify the characteristics of fertilizer utilization,and determine the optimum fertilizer rate of oats in Baicheng. Husked oat cultivar Baiyan 7 was used and fourteen treatments with different nitrogen( N),phosphorus( P),potassium( K) were designed according to the "3414 " experiment design in 2012 and 2013. The yield was analysed with different models. The result showed that optimum N,P and K-fertilizer rate was 90,50 and 35 kg / hm^2,and seed yield was about 2 800- 3 000 kg /hm^2,when simulation by three-factor model. The optimum N,P and K-fertilizer rate was 100,40 and 30 kg / hm^2,and seed yield was about2 800- 3 150 kg / hm^2,when simulation by one-factor model. Through economic benefit analysis,we found that when the N,P and K-fertilizer rate was 90,45 and 0 kg / hm^2,oat can obtain optimum net benefit with 6 100-6 300 RMB yuan / hm^2. Based on the above,we can draw a conclusion that a high yield and net benefit could be achieved when N and P-fertilizer rate was 90 and 40- 45 kg / hm^2,K fertilizer need not apply or apply a little.
出处
《作物杂志》
CAS
北大核心
2015年第3期98-103,共6页
Crops
基金
国家燕麦荞麦产业技术体系项目(CARS-08-B-1)
国家公益性行业(农业)科研专项(201103001)
国家"十二五"粮食丰产科技工程项目(2011BAD16B15)