期刊文献+

耐水性阳离子丙烯酸酯乳液的制备 被引量:4

The Preparation of Water-Resistant Cationic Acrylate Emulsion
下载PDF
导出
摘要 将自制的高分子乳化剂与烷基溴化铵季铵盐型乳化剂配合使用,制备阳离子丙烯酸酯乳液,确定了高分子乳化剂与十六烷基三甲基溴化铵(CTAB)的最佳质量配比为19.6∶0.6,由此得到的乳液粒径最小、稳定性最佳。并探讨了添加不同功能性单体对阳离子乳液的耐水性与粒径的影响,实验结果表明:加入功能单体三甘醇二甲基丙烯酸酯交联剂(V-389)时乳液的耐水性最好,当V-389用量为1.7%(占主单体总量)时,乳液的吸水率达到最小值3.62%,性能较优良。 A cationic acrylate emulsion was synthesized by synergizing the self-prepared polymer emulsifier with the alkyl quaternary ammonium emulsifier. It was proved that the minimum particle size of the emulsion having good storage stability was obtained when the mass ra- tio of polymer emulsifier to hexadecyl trimethyl ammonium bromid ( CTAB ) was 19.6:0. 6. Meanwhile, the influence of different functional monomers on the water resistance and particle size of the polymer emulsion was studied. The result showed that the cationic emulsion gave the best water resistance when the funetional monomer V-389 was added, and specifically gave the lowest water absorption 3.62% and good property when the dosage of V-389 was 1.7% ( based on total weight of main monomers).
出处 《涂料工业》 CAS CSCD 北大核心 2015年第7期63-67,共5页 Paint & Coatings Industry
基金 表面处理028030003
关键词 阳离子乳液 复合乳化剂 耐水性 粒径 cationic emulsion mixed surfactants water resistance particle size
  • 相关文献

参考文献6

  • 1孟婷婷,吕正伟,季永新.喷墨打印阳离子丙烯酸酯乳液的制备与性能[J].涂料工业,2014,44(4):60-64. 被引量:4
  • 2JIANG X B,ZOU D, KONG X Z, et al. Styrene-butyl ac- rylate copolymers latexes prepared with different functional monomers and their application as anti-icing coatings [ J]. Journal of Polymer Research,2014,21(6) : 11-16.
  • 3YAN X H, JI Y X, HE T. Synthesis of fiber crosslinking cationic latex and its effect on surface properties of paper [ J ]. Progress in Organic Coatings, 2013,76 ( 1 ) : 11-16.
  • 4马云,陈琨,辛秀兰.苯丙乳液胶粒粒径和涂膜吸水率的影响因素[J].涂料工业,2009,39(7):34-37. 被引量:11
  • 5PATIST A, OH S G, LEUNK R, et al. Kinetics of mi- cellization: its significance to technological processes [ J ]. Collids and Surfaces A: Physicochemical and Engineering Aspects, 2001,176( 1 ) :3-16.
  • 6杨琴,周兴平,解孝林.阴、阳离子型纳米苯丙乳液的制备及其共絮凝研究[D].武汉:华中科技大学,2011.

二级参考文献10

  • 1杨宁,高凤娟.彩色喷墨打印纸的研究[J].中国造纸,2005,24(1):1-5. 被引量:26
  • 2瓦尔森,C A芬奇.合成聚合物乳液的应用[M].成国祥,庞兴收,刘超,等译.北京:化学工业出版社,2004.
  • 3曹同玉 刘庆普 胡金生.聚合物乳液合成原理、性能及应用[M].北京:化学工业出版社,1999..
  • 4EI-MOI,I,A M M. Synthesis of polyurethane aclate oli- gomers as aqueous UV-curable binder for inks of ink jet in textile printing and pigment dyeing E J ]. Dyes and Pigments, 2006,74 (2) : 371-379.
  • 5EISENLOHR R. GIESEN V. Pigment printing and ecology [ J]. International Dyer, 1995,180: 12-16.
  • 6SEBEN1K U, KRAJNC M. Properties of acrylic-polyure- thane hybrid emulsions synthesized by the semibatch ,mul- sion copolymerization of acrylates using different polyure- thane particles [ J ]. Journal of Polymer Science Part A: Polymer Chemistry,2005,43(18) :4050-4069.
  • 7BAI R Q, QIU T. Preparation and characlerizalion of mul- sifter- free polyphenylsilsesquioxane - poly ( styrene - butyl acrylate) hybrid particles [ J ]. Applied Surface Science, 2013,282:231-235.
  • 8熊巧稚,夏正斌,沈慧芳,陈焕钦.阳离子丙烯酸酯聚合物乳液的合成、应用现状及发展前景[J].涂料工业,2010,40(8):66-69. 被引量:4
  • 9柳艳敏,盖树人,王亚东.彩色喷墨打印纸涂层技术的研究进展[J].信息记录材料,2012,13(3):17-22. 被引量:11
  • 10王晨,季永新.两性可聚合型丙烯酸酯单体的合成及应用[J].化学与粘合,2012,34(5):25-29. 被引量:7

共引文献11

同被引文献46

引证文献4

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部