摘要
采用真空法对湿加松（Pinus elliottii Х p．catibaea）木材进行防腐处理，研究不同防腐处理工艺防腐处理效果、树干不同离地高度木材和径向不同部位木材防腐可处理性的差异。结果表明防腐处理工艺、树干离地高度和径向不同部位均对湿加松木材我药量有显著影响（P〈0．01）。防腐处理工艺的处理时间、真空度是影响湿加松防腐可处理性的主要因素。湿加松径向内层载药量显著高于外层（P〈0．05）；湿加松径向木材和枝下高部分（0～9．3m）轴向木材的载药量与木材气干密度呈负相关；树干离地高度为93～11．3m的湿加松木材载药量最小。
Preservative treatability of Pinus elliottiix P.earibaea wood was studied in this paper. Results showed that both treatment processes and wood position had great effect on P. elliottii Х P.earibaea wood preservation treatability. Vacuum degree and treatment time were the main factors of wood preservation treatability; the preservative retention of wood from inner annual layer is higher than that of wood from outer annual layer;and there was an evident negative correlation between wood density and the treatability of samples from different trunk position （ radial direction and wood at height under branch ） . Samples at 9.3-11.3 m above ground were more difficult to treat than other wood section.
出处
《广东林业科技》
2015年第2期84-88,共5页
Forestry Science and Technology of Guangdong Province
基金
广东省林业科技创新专项资金项目"湿加松多功效木材防护关键技术研究"(2012KJCX012-02)
"合成树脂增强木材保护技术研究"(2014KJCX014)
关键词
湿加松
防腐
处理工艺
离地高度
径向内层
径向外层
Pinus elliottiiХ P. earibaea
preservation
treatment process
tree height
inner annual layer
outerannual layer
