摘要
研究在油水两相流体润滑条件下,径向滑动轴承启动阶段液膜压力和液膜厚度等参数的变化规律,分析初始条件对轴承稳态润滑性能的影响,以及突变载荷对轴承润滑的影响。结果表明:启动阶段液膜压力先迅速增大,达到最大值后逐渐减小达到稳态,液膜温度持续增加最终达到平衡,承载瓦块处液膜厚度随着压力的增大而减小,非承载瓦块处间隙增大;不同初始载荷、温度、转速对轴承润滑性能都有显著影响;突变载荷会造成液膜压力的突变,同时对液膜温度、液膜厚度也有影响。
The variations of hydrodynamic pressure and film thickness with water-in-oil lubricants during start-up were studied, the effects of initial conditions and impact load on the lubrication characteristics of journal bearing were analyzed. The results show that during the period of start-up, film pressure is increased quickly to peak and then decreased to a steady state, temperature is continuously increased before reaching steady state, and the film thickness on the bearing pads is decreased with the increase of pressure, the clearance on the non bearing pads is increased.The effects on the lubrication characteristics of bearings by different initial loads, temperatures and speeds are remarkable. Impact load can lead to the impact of film pressure, and also has influences on temperature and film thickness.
出处
《润滑与密封》
CAS
CSCD
北大核心
2015年第7期11-16,共6页
Lubrication Engineering
基金
国家自然科学基金项目(51375436)
关键词
径向轴承
热弹流润滑
瞬态特性
初始条件
突变载荷
journal bearings
thermoelastohydrodynamic lubrication
transient characteristics
initial conditions
impact
