期刊文献+

微喷砂后处理工艺对涂层刀具性能的影响规律 被引量:9

A review of the effect of micro-blasting post-treatment process on the performance of coated tools
下载PDF
导出
摘要 涂层刀具广泛用于切削加工,对涂层刀具进行后处理可进一步提高其切削性能。微喷砂是一种有效提高机械零件性能的手段,可作为涂层刀具后处理工艺。介绍了微喷砂后处理工艺的基本原理、分类和工艺参数,从涂层形貌、力学性能以及刀具磨损三个方面综述微喷砂后处理工艺对涂层刀具性能的影响,对比分析喷砂与喷丸、干式微喷砂与湿式微喷砂对涂层刀具性能的影响。微喷砂能够改善涂层表面粗糙度,提高涂层表层硬度,使涂层表层产生残余压应力,显著提高涂层刀具寿命。 Coated tool whose cutting performance can be further improved by post-treatment process, is widely used in the cutting process. Micro-blasting, an effective method of improving the performance of mechanical parts, can be used as the post-treatment process of coated tool. The basic principle, classification and process parameters of micro-blasting post-treatment process are sum- marized. The effect of micro-blasting post-treatment process on the performance of coated tools basing on the coating morphology, mechanical properties and wear of coated tools is reviewed. The similarities and differences of the effect between grit blasting and shot peening,dry micro-blasting and wet micro-blasting on the performance of coated tools are analyzed. Micro-blasting can im- prove coating surface roughness, increase coating hardness, generate compressive stress and significantly improve the life of coated tools.
出处 《现代制造工程》 CSCD 北大核心 2015年第7期85-92,共8页 Modern Manufacturing Engineering
基金 国家自然科学基金项目(51375272 U1201245) 高档数控机床与基础制造装备国家科技重大专项项目(2014ZX04012-014)
关键词 涂层刀具 微喷砂 切削性能 后处理 coated tools micro-blasting cutting performance post-treatment
  • 相关文献

参考文献30

  • 1刘战强,黄传真,万熠,艾兴.切削温度测量方法综述[J].工具技术,2002,36(3):3-6. 被引量:55
  • 2Rech J. Influence of cutting tool coatings on the tribological phenomena at the tool-chip interface in orthogonal dry turning [ J]. Surface and Coatings Technology, 2006 (200) : 5132 - 5139.
  • 3Klocke F, Krieg T. Coated tools for metal cutting-features and applications [ J ]. CIRP Annals-Manufacturing Technology, 1999,48(2) :515 -525.
  • 4张而耕,吴雁.现代PVD表面工程技术及应用[M].北京:科学出版社,2013.
  • 5Barbatti C, Garcia J, Pitonak R, et al. Influence of micro- blasting on the microstructure and residual stresses of CVD K-A12 03 coatings [ J ]. Surface and Coatings Technology, 2009 (203) :3708 - 3717.
  • 6Bouzakis K-D, Skordaris G, Miehailidis N, et al. Effect on PVD coated cemented carbide inserts cutting performance of micro-blasting and lapping of their substrates [ J ]. Surface and Coatings Technology, 2005 (200) : 128 - 132.
  • 7Gold P W, Loos J. Wear resistance of PVD-coatings in miler bearings [ J ]. Wear, 2002 ( 253 ) :465 - 472.
  • 8Mohammadi Z, Ziaei-Moayyed A A, Sheikh-MehdiMesgar A. Grit blasting of Ti-6A1-4V alloy : optimization and its effect on adhesion strength of plasma-sprayed hydroxyapatite coat- ings [ J ]. Journal of Materials Processing Technology, 2007 (194) : 15 - 23.
  • 9Kennedy D M, Vahey J, Hanney D. Micro shot blasting of machine tools for improving surface finish and reducing cut- ting forces in manufacturing [ J ]. Materials and Design, 2005 (26) : 203 - 208.
  • 10Klocke F, Gorgels C, Bouzakis E, et al. Tool life increase of coated carbide tools by micro blasting[ J]. Production Engi- neering, 2009 ( 3 ) :453 - 459.

二级参考文献4

共引文献58

同被引文献75

引证文献9

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部