期刊文献+

Effects of cooling rate and Al on MnS formation in medium-carbon non-quenched and tempered steels 被引量:14

Effects of cooling rate and Al on MnS formation in medium-carbon non-quenched and tempered steels
下载PDF
导出
摘要 The effect of Al on the morphology of MnS in medium-carbon non-quenched and tempered steel was investigated at three different cooling rates of 0.24, 0.43, and 200°C·s^-1. The formation mechanisms of three types of MnS were elucidated based on phase diagram information combined with crystal growth models. The morphology of MnS is governed by the precipitation mode and the growth conditions. A monotectic reaction and subsequent fast solidification lead to globular Type I MnS. Type II MnS inclusions with different morphological characteristics form as a result of a eutectic reaction followed by the growth in the Fe matrix. Type III MnS presents a divorced eutectic morphology. At the cooling rate of 0.24°C·s^-1, the precipitation of dispersed Type III MnS is significantly enhanced by the addition of 0.044wt% acid-soluble Al(Als), while Type II MnS clusters prefer to form in steels with either 0.034wt% or 0.052wt% Als. At the relatively higher cooling rates of 200°C·s^-1 and 0.43°C·s^-1, the formation of Type I and Type II MnS inclusions is promoted, and the influence of Al is negligible. The results of this work are expected to be employed in practice to improve the mechanical properties of non-quenched and tempered steels. The effect of Al on the morphology of MnS in medium-carbon non-quenched and tempered steel was investigated at three different cooling rates of 0.24, 0.43, and 200°C·s^-1. The formation mechanisms of three types of MnS were elucidated based on phase diagram information combined with crystal growth models. The morphology of MnS is governed by the precipitation mode and the growth conditions. A monotectic reaction and subsequent fast solidification lead to globular Type I MnS. Type II MnS inclusions with different morphological characteristics form as a result of a eutectic reaction followed by the growth in the Fe matrix. Type III MnS presents a divorced eutectic morphology. At the cooling rate of 0.24°C·s^-1, the precipitation of dispersed Type III MnS is significantly enhanced by the addition of 0.044wt% acid-soluble Al(Als), while Type II MnS clusters prefer to form in steels with either 0.034wt% or 0.052wt% Als. At the relatively higher cooling rates of 200°C·s^-1 and 0.43°C·s^-1, the formation of Type I and Type II MnS inclusions is promoted, and the influence of Al is negligible. The results of this work are expected to be employed in practice to improve the mechanical properties of non-quenched and tempered steels.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2015年第6期589-597,共9页 矿物冶金与材料学报(英文版)
基金 financially supported by the National Natural Science Foundation of China (Nos. 51174020 and 51374018) the National High-Tech Research and Development Program of China (No. 2013AA031601)
关键词 medium carbon steels cooling rate aluminum content manganese sulfide formation mechanisms medium carbon steels cooling rate aluminum content manganese sulfide formation mechanisms
  • 相关文献

参考文献3

二级参考文献25

  • 1李联生,朱荣,殷浩,刘平,张利平,魏承志,周平,董杰.CaSRE系超易切削钢的研究开发[J].稀土,2005,26(5):48-51. 被引量:9
  • 2李艳梅,朱伏先,崔凤平,房轲.中厚钢板分层缺陷的形成机制分析[J].东北大学学报(自然科学版),2007,28(7):1002-1005. 被引量:49
  • 3严国安,秦哲,田志红,孙彦辉,蔡开科.中碳钙硫易切削钢夹杂物形态控制[J].北京科技大学学报,2007,29(7):685-688. 被引量:18
  • 4Sims C E, Dahle F B. Effect of aluminum on the properties of medium-carbon cast steel. Trans AFS, 1938, 46:65.
  • 5Sims C E. The nonmetallic constituents of steel. Trans AIME, 1959, 215:367.
  • 6Fredriksson H, Hillert M. Eutectic and monotectic formation of MnS in steel and cast iron. J Iron Steel lnst, 1971, 209 : 109.
  • 7Yeo R B G. The effect of oxygen in resulfurized steels-Part Ⅱ. J Met, 1967, 19:23.
  • 8Yeo R B G. The effect of oxygen in resulfurized steels-Part Ⅰ . J Met, 1967, 19:29.
  • 9Kohichi I, Yoshiaki K, Hirobumi M. The effect of oxygen content on the formation behavior of sulfides of MnS system and the ma- chinability of low carbon resulphurized steel. Tetsu-to-Hagane, 1994, 80(12): 20.
  • 10Baker T J, Chares J A. Morphology of manganese sulphide in steel. J Iron Steel lnst, 1972, 210:702.

共引文献50

同被引文献127

引证文献14

二级引证文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部