摘要
为掌握机械瓣膜衬底温度对类金刚石薄膜的影响规律,在实验中保持其它实验参数不变,机械瓣膜衬底温度分别取室温和150℃时,用脉冲激光沉积法在机械瓣膜上制备类金刚石薄膜。用Raman光谱仪对薄膜的微观结构进行检测;用原子力显微镜对薄膜的表面形貌和粗糙度进行检测。结果表明:当其它实验参数不变时,机械瓣膜衬底温度从室温升高到150℃时,薄膜的微观结构没有发生明显改变;薄膜表面的粗糙度减小。类金刚石薄膜和机械瓣膜衬底之间具有很好的黏附性。
In order to find out the rule for temperature of mechanical heart valves to influence diamond like carbon（DLC） film,the DLC films were deposited on mechanical heart valves by the pulsed laser deposition while the temperature of the mechanical heart valve were kept chamber temperature and 150℃respectively and other experimental conditions unchangeable.The microstructure of the film was detected by the visible Raman spectroscopy.The topography and roughness of the film were detected by the atomic force microscopy（AFM）.The experimental results demonstrate that when the temperature of the mechanical heart valve increases from chamber temperature to 150℃,change of the film microstructure would not be obvious.The roughness of film surface would reduce.The diamond like carbon film would exhibit strong adhesion to mechanical heart valve.
出处
《量子电子学报》
CAS
CSCD
北大核心
2015年第4期498-502,共5页
Chinese Journal of Quantum Electronics
基金
安徽省自然科学基金资助(1308085MF104)
关键词
材料
类金刚石薄膜
脉冲激光沉积法
衬底温度
微观结构
表面形貌
materials
diamond like carbon film
pulsed laser deposition
substrate temperature
microstructure
topography
