期刊文献+

基于快速成型技术的非均质件制备工艺新方法 被引量:2

The Preparation of Heterogeneous Parts Based onRapid Prototyping Technology
原文传递
导出
摘要 非均质零件以其性能独特、功能集中、应用范围广等优点,在各个领域有着广阔的应用前景。传统方法采用串行的方法制备非均质件,对于复杂形状及材料梯度三维变化的非均质件制备比较困难,非均质件的使用性能也受到很多限制。快速成型技术为非均质件的制备提供了一种全新的思路,零件成型和材料制备并行完成,不仅可以直接加工微小、复杂的零件,而且在成型过程中可以很方便的改变非均质件内部材料组分。通过对快速成型技术制备非均质件的工艺流程、内部梯度变化及典型工艺的分析可知,快速成型技术使理想非均质件实现了制造的可能。 Heterogeneous parts have a broad application prospect in various fields for its advantages, such as unique properties, concentrated functions and the range of applications. In the conventional approaches, heterogeneity is prepared by serial method, and this method is more difficult to prepare the heterogeneity of complex shape and material gradient 3D changes , the usability of heterogeneity is limited. Rapid prototyping technology offer a new thought to prepare the heterogeneous parts, that is work piece forming and materials preparation can be done in parallel. So it is not only can process tiny or complex parts directly, but also can easily change internal material components in the process of forming heterogeneous. Through the analysis of the process flow, the internal change of gradient and the typical process, rapid prototyping technology make the ideal heterogeneous parts realize the possibility of manufacturing.
出处 《机械设计与研究》 CSCD 北大核心 2015年第4期125-128,共4页 Machine Design And Research
基金 湖南省教育厅一般资助项目(14C0824)
关键词 快速成型 非均质件 制备工艺 串行制备 并行制备 rapid prototyping heterogeneous part the preparation process serial preparation parallel preparation
  • 相关文献

参考文献15

  • 1Ikegaga A. Near-Net Shape Forming of Functionally Graded Ce- mented Carbide, Sinter-Bonded on Steel [ J]. Materials Science Forium, 1999,308:487- 492.
  • 2黄伯云,易健宏.现代粉末冶金材料和技术发展现状(二)[J].上海金属,2007,29(4):1-5. 被引量:18
  • 3王东生,田宗军,沈理达,刘志东,黄因慧.等离子喷涂纳米复合陶瓷涂层的组织结构及其形成机理[J].中国有色金属学报,2009,19(1):77-83. 被引量:26
  • 4赵红,杨建桥,张幸红.自蔓延高温合成涂层技术现状及展望[J].材料导报,2006,20(F05):229-232. 被引量:6
  • 5曾祥辉.基于均匀熔滴喷射的AI/Ti非均质件制备技术基础研究[D].西安:西北工业大学,2011.
  • 6Chiu Y Y, Liao Y S, Hou C C. Automatic fabrication for bridged laminated object manufacturing ( LOM ) process [ J ]. Journal of Materials Processing Technology,2003, 140( 1 ) : 179 - 184.
  • 7Keehagias J. An experimental investigation of the surface roughness of parts produced by LOM process [ J]. Rapid Prototyping Journal, 2007, 13(1): 17 -22.
  • 8Yu D G, Branford-White C, Ma Z H, et al. Nove! drug delivery devices for providing linear release profiles fabricated by 3DP[ J ]. International Journal of Pharmaceutics ,2009, 370( 1 ) : 160 - 166.
  • 9Chiu W K, Yu K M. Direct digital manufacturing of three-dimen- sional functionally graded material objects [ J ]. Computer-Aided Design,2008, 40(12) : 1080 1093.
  • 10Liu H C, Stampfl J, Kang S. Fabrication of ceramic components for micro gas turbine engines[ J ]. Ceramic Engineering & Science Proceedings,2002, 23(4) : 43 -48.

二级参考文献59

共引文献113

同被引文献25

  • 1林开颜,吴军辉,徐立鸿.彩色图像分割方法综述[J].中国图象图形学报(A辑),2005,10(1):1-10. 被引量:322
  • 2吴晓军,刘伟军,王天然,温佩芝.距离场定义下异质材料CAD信息建模方法[J].计算机辅助设计与图形学学报,2005,17(2):313-319. 被引量:12
  • 3刘丰,张人佶,陈立峰,颜永年.组织工程支架三维结构点单元数据建模[J].机械工程学报,2006,42(10):37-42. 被引量:6
  • 4王素,朱玉明,朱心雄.基于有限元法功能梯度材料零件自适应切片算法[J].航空学报,2008,29(1):240-245. 被引量:3
  • 5H AI Akhras, T Elguedj, A Gravouil, et al. Isogeometric analysis-suitable trivariate NURBS models from standard B-Rep models [J]. Computer Methods in Applied Mechanics and Engineering (S0045-7825), 2016, 307(1): 256-274.
  • 6Xu G, Bernard M, Regis D, et al. Analysis-suitable volume parameterization of multi-block computational domain in isogeometric applications [J]. Computer-Aided Design (S0010-4485), 2013, 45(2): 395-404.
  • 7H A1 Akhras, T Elguedj, A Gravouilac, et al. lsogeometric analysis-suitable trivariate NURBS models from standard B-Rep models [J]. Computer Methods in Applied Mechanics and Engineering (S0045-7825), 2016, 307(1) 256-274.
  • 8S Sikder, A Barari, H A Kishawy. Global adaptive slicing of NURBS based sculptured surface for minimum texture error in rapid prototyping [J]. Rapid Prototyping Journal (S1355-2546), 2015, 21(6): 649-661.
  • 9Su Wang, Yan Wang, Chin-Sheng Chen, et al. An adaptive slicing algorithm and data format for functionally graded material objects [J]. The International Journal of Advanced Manufacturing Technology (S0268-3768), 2013, 65(1): 251-258.
  • 10Binil Stady, Alan Lau. Direct slicing of STEP based NURBS models for layered manufacturing [J]. Computer-Aided Design (S0010-4485), 2005, 37(1): 1-16.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部