期刊文献+

覆砂金属型铸造高锰钢衬板的组织与性能 被引量:2

Microstructures and Properties of High Manganese Steel Liner Produced by Sand-Lined Metal Mold
下载PDF
导出
摘要 对比考察了覆砂金属型和水玻璃砂型铸造高锰钢衬板的组织和性能。结果表明,通过覆砂金属型工艺使高锰钢衬板铸态组织中碳化物数量明显减少,冲击韧度最高达94 J/cm2,显著高于相同状态下普通水玻璃砂型铸造的衬板。冲击磨粒磨损试验表明,覆砂金属型高锰钢衬板铸态和热处理态的磨损量分别比热处理态普通水玻璃砂型衬板减小36%和28%;前者耐磨性的提高,不仅与较高的综合力学性能有关,也与其较少的缩松及较高的致密度相关。 The microstructures and properties of high manganese steel liners produced by sand-lined metal mold and common sand mold were investigated in the present study. The results show that the amount of carbide was obviously decreased by the sand-lined metal mold. The impact toughness can be as high as 94 J/cm^2, significantly higher than that of common liner produced by the sand mold in the same condition. Besides, abrasion test shows that the weight loss in the impact-abrasion test for the liner produced by the sand-lined metal mold was decreased 36% in the as-cast and 28% in the heat treated conditions compared with that of sand mold casting. The improvement in the abrasion resistance is believed to be related to relatively high mechanical properties as well as decreased shrinkage defects and its high density of the liners by sand-lined metal mold.
出处 《铸造》 CAS CSCD 北大核心 2015年第9期897-900,共4页 Foundry
关键词 高锰钢 衬板 覆砂金属型 力学性能 high manganese steel liner sand-lined metal mold mechanical properties
  • 相关文献

参考文献13

二级参考文献42

共引文献160

同被引文献62

引证文献2

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部