摘要
针对现有四光幕精度靶理想化结构模型及测量精度分析无法满足其工程化设计及发展需求的问题,构建了通用的四光幕精度靶工程化结构模型,推导了相应的坐标测量及误差传播公式,仿真分析了着靶位置、靶距、幕面夹角、靶面大小、弹丸斜入射角度等多参量对系统坐标测量精度的影响,得到了系列坐标测量误差分析数据.最后给出了一实际四光幕精度靶的结构及理论坐标测量误差估计.实弹射击表明,该系统在1m×1m有效靶面内的X、Y坐标测量误差均小于2mm,与理论仿真分析结果接近,验证了所提工程化测量模型的正确性,测量精度分析有效.研究结果可为实用型四光幕精度靶的设计及测量精度评估提供可靠参考.
As the ideal structure model and accuracy analysis of existing four-light-screen optical target cannot meet the requirement of engineering design and development,a common engineering structure model was developed,and the measurement formulas and error transfer formulas were deduced.The influences of different parameters,such as the impact location,target distance,light-screen intersection angles and the size of sensor area,to the position measurement accuracy of system were analyzed through simulation.A series of position measurement error analysis data were acquired.The structure and theoretical error estimate results of a practical four-light-screen optical target were given.The live-fire testing result shows that the Xand Yposition measurement errors of this four-light-screen optical target system in a 1m×1msensor area are less than 2mm,which is close to the theoretical analysis result,and the result verified the correctness of the proposed engineering model and effectiveness of theoretical analysis.This research can provide useful reference for practical design and accuracy estimate of fourlight-screen optical target.
出处
《光子学报》
EI
CAS
CSCD
北大核心
2015年第8期27-33,共7页
Acta Photonica Sinica
基金
国家自然科学基金(No.61471289)
陕西省科学技术研究发展计划(No.2014K05-41)
陕西省教育厅科技项目(No.2013JK1053)
西安工业大学"兵器光电测试技术与仪器"科研创新团队项目资助
关键词
测量
四光幕精度靶
建模
着靶坐标
精度分析
弹丸
光幕
Measurement
Four-light-screen optical target
Modeling
Impact location
Accuracy analysis
Projectile
Light screen