期刊文献+

横向电场下的类金刚石薄膜激光损伤 被引量:2

Laser-induced damage of diamond-like carbon films with horizontal electric field
下载PDF
导出
摘要 类金刚石(DLC)薄膜在红外区有很高的透过率,但激光损伤阈值低,严重限制了其应用领域。采用直接在DLC薄膜上沉积Ti电极,基于激光损伤阈值(LIDT)测试平台,用1-on-1零几率损伤法,研究了在不同偏置电场下DLC薄膜损伤阈值及损伤形貌的变化。发现电场强度从0增加到700V/cm,损伤阈值明显增大;进一步增大偏置电场,损伤阈值相对不变。分析认为偏置电场改变了激光辐照DLC薄膜区域的光生载流子漂移速度,减小了DLC薄膜的局部热累积,减缓了薄膜的石墨化进程,提高了DLC薄膜的抗激光损伤阈值。 Diamond-like carbon(DLC)films are widely used in infrared region.However,DLC is prone to laser damage,which fetters the film's usage in infrared high power laser systems and laser protection systems.The laser-induced damage threshold(LIDT)and damage morphology of DLC films were studied based on ISO11254 in different horizontal fields.Ti electrodes were deposited on the DLC films directly.It was found that the field intensity increased from 0to 700V/cm and the LIDT also increased;however,the LIDT was relatively unchanged over this horizontal field.Analysis suggests that the horizontal electric field changes the photo-induced carriers' drift velocity in DLC film's laser-induced area,then reduces the local heat accumulation,slows down the graphitization process in DLC films,and increases the laser-induced damage threshold of DLC film at last.
出处 《强激光与粒子束》 EI CAS CSCD 北大核心 2015年第9期96-99,共4页 High Power Laser and Particle Beams
基金 国家自然科学基金项目(61205155 61378050) 科技部国际合作项目资助(2013DFR70620) 陕西省教育厅科技项目(2013JK0632) 陕西省科学技术研究发展计划项目(2013KW06)
关键词 类金刚石薄膜 激光损伤阈值 损伤形貌 偏置电场 石墨化 diamond-like carbon film laser-induced-damage threshold damage morphology horizontal electric field graphitization
  • 相关文献

参考文献9

二级参考文献77

共引文献30

同被引文献27

  • 1徐均琪,苏俊宏,谢松林,梁海锋.不同技术制备DLC膜的激光损伤特性研究[J].真空科学与技术学报,2007,27(3):181-184. 被引量:9
  • 2Wu Shenjiang, Shi Wei, Su Junhong. Using an external electric field to reduce laser damage of DLC films [J]. International Journal of Ma terials and Product Technology, 2012, 45(1/4) .- 74 82.
  • 3Mori T, Fujiwara M, Manory R R, et al. Hf()2 thin films prepared by ion beam assisted deposition[j~. Surfaceand Coatings Technology, 2003, 169/170(22) : 528 531.
  • 4Skoric B, Kaka D, Bibie N, et al. Microstructural studies of TiN coatings prepared by PVD and IBAD[J]. Sur3~ace Science, 2004, 566/568: 40-44.
  • 5Takanori Mori, Makoto Fu~iwara. Study on HfO2 film prepared by ion-assisted deposition using a gridless end hall ion source[J]. Thin Sol id Film, 1999, 350(1/2): 203-208.
  • 6Cheng C L, Chia C T, Chiu C C, et al. Hydrogen effects on the post production modification of diamond-like carbon produced by pulsed laser deposition[J]. Diamond and Related Materials, 2001,10:970 975.
  • 7Yang S H, Kong H, Lee K R, et al. Effect of environment on the tribological behavior of Si-neorporated diamond-like carbon films[J] Wear, 2002, 252: 70-79.
  • 8Druz B, Zaritskiy I, Hoehn J, et al. Direct ion beam deposition of hard diamond-like films from RF inductively coupled plasma soureeEJ] Diamond and Related Materials, 2001, 10 : 931-936.
  • 9Targove J D, Macleod H A. Verification of momentum transfer as the dominant densifying mechanism in ion-assisted deposition[J]. Appl Opt, 1988, 27(18): 3779-3781.
  • 10Kaufman H R, Robinson R S, Seddon R L. End-Hall ion source[J]. Journal of Vacuum Science and Technology. A: Vacuum, Surfaces and Films, 1987, 5(4) : 2081-2084.

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部