摘要
水中结构物通常会受到波浪和水流的联合作用,为了得到作用在结构上的波流荷载,该文基于Flow-3D软件建立了三维波流水槽的模拟模型。为了准确模拟波浪和水流的相互作用,避免将造波边界和水流边界同时叠加在入口边界处,采用质量源造波法来实现内造波。利用Flow-3D的二次开发功能在水槽两端设置海绵层消波区,并结合Sommerfeld辐射边界条件来实现水槽的通流消波。对波浪的传播、波流相互作用试验的流场以及波流和柱体结构相互作用试验的流场进行数值模拟,结果表明:所建立的三维波流水槽模型可以准确地模拟波浪和水流的相互作用以及波流对结构的联合作用,并有效地进行消波,避免了二次反射,可用于波浪和水流联合作用下水中结构物波流荷载的研究。
Marine structures are usually subjected to the combined action of wave and current. To obtain wave-current loads acting on the structures, a simulation model for three-dimensional wave-current flumes is developed based on CFD software Flow-3D. In order to simulate the interaction between wave and current accurately, a mass source is added into the flume to generate waves, avoiding the simultaneous superposition of wave and current at inflow boundaries. The sponge layers are added at both ends of the flume using the secondary development technology of Flow-3D. These added layers are further combined with Sommerfeld radiation boundary conditions to absorb waves and to allow currents to flow through the flume. Subsequently, the developed model is used to simulate the propagation of waves, the flow field of experiments on the interactions between waves and currents, and the flow field of experiments on the interactions between wave-current and cylinder structures. The comparison shows that the developed model for a three-dimensional wave-current flume can accurately simulate the wave-current interaction and the combined action acting on structures. The model can effectively absorb waves and avoid re-reflection of waves, which can be used to study the wave-current loads acting on marine structures,
出处
《工程力学》
EI
CSCD
北大核心
2015年第10期68-74,88,共8页
Engineering Mechanics
基金
国家重点基础研究发展"973"计划项目(2011CB013606)
国家自然科学基金面上项目(51378343)
关键词
数值波流水槽
质量源造波
海绵层消波
波流相互作用
水中结构物
波流荷载
numerical wave-current flume
mass source wave generating method
sponge layer forwave-absorbing
wave-current interaction
marine structures
wave-current loads
