期刊文献+

含泥质灰岩储层的测井流体识别----以中东YL-DS油田为例

Logging Identification of Fluids in Argilliferous Limestone Reservoirs in YL-DS Oil Field, Middle East
下载PDF
导出
摘要 中东YL-DS油田高含泥质灰岩储层(泥质含量3%-8%)电阻率低,常规解释的含水饱和度较高,按纯灰岩储 层段流体评价标准常被判定为水层.本研究避开对难以量化表征的纯灰岩骨架中束缚水的直接求取,通过计算储层中 的泥质束缚水孔隙度来直接校正常规含水饱和度,筒单易行,在实践中取得了良好的效果.具体方法为根据纯泥岩的 筒化模型计算纯泥岩孔隙度,然后采用能谱测丼资料计算干黏土的密度值,计算泥质灰岩储层中的泥质束缚水孔隙 度,对常规阿尔奇公式计算的水饱和度进行泥质束缚水饱和度校正而获得视纯灰岩含水饱和度,最后采用校正后的含水饱和度和纯灰岩段标准解释图版综合判断储层流体性质. Argilliferous limestone reservoirs usually are of high argillaceous content(3%~8%) but low logging resistivity values in YL-DS Oil Field, Middle East. Interpreted as high water saturation by the conventional logging method,they are likely mistakably judged as aquifers according to the evaluation standard for the pure carbonate reservoirs. A simple available method of correctly identifying what the fluids are in argilliferous limestone reservoirs according to spectral log data and other calculations is put forward and successfully applied in this oil field. The method is:(1) analyze clay types by spectral log data and estimate density of dry clay;(2) calculate porosity of pure mudstone by the simplified mudstone model, and then calculate the porosity related with argillaceous bound water in the argilliferous limestone reservoirs;(3) correct argillaceous bound water saturation with the water saturation calculated by normal Archie′s formula to obtain water saturation in apparent pure limestone; and(4) comprehensively identify fluid types by the corrected pure limestone saturation and the standard cross-plot of pure limestone reservoirs.
出处 《海相油气地质》 CSCD 北大核心 2015年第4期73-77,共5页 Marine Origin Petroleum Geology
关键词 石灰岩储层 储层流体 流体识别 测井解释 Argilliferous limestone Limestone reservoir Reservoir fluid,Fluid identification Logging interpretation
  • 相关文献

参考文献16

二级参考文献95

共引文献173

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部