期刊文献+

齿轮磨削烧伤自动检测系统的设计与实现 被引量:3

Design and Implementation of Automatic Detection System of Gear Grinding Burn
原文传递
导出
摘要 针对圆柱齿轮和锥齿轮磨削加工后,齿面的磨削烧伤检测问题,提出了基于机械手的磨削烧伤检测系统,提高检测的自动化程度和可靠性。阐述了基于巴克豪森噪声法的烧伤检测原理,结合机械手的运动轨迹规划,对安装在转台上的齿轮进行自动检测,实验结果验证了该方法的可行性,对于齿轮生产中的质量控制有重要意义。 For the detection of grinding burn about tooth flank of cylindrical gear and bevel gear after grinding,the grinding burn detection system based on manipulator is proposed,which improves the degree of automation and reliability.The Barkhausen noise inspection method for detection grinding burn is focused on introduced.The automatically detected is performed by the sensor on a robot and a turntable.The experimental results demonstrate the feasibility of this method for quality control in gear production.
出处 《机械传动》 CSCD 北大核心 2015年第11期145-149,共5页 Journal of Mechanical Transmission
基金 国家重大科学仪器设备开发专项(2013YQ590395)
关键词 齿轮 巴克豪森噪声 烧伤检测 机械手 Gear Barkhausen noise Grinding burn detection Manipulator
  • 相关文献

参考文献11

  • 1朱正德.工件磨削烧伤及其检测、评定方法简析[J].柴油机设计与制造,2013,19(2):36-39. 被引量:6
  • 2Karpuschewski B,Toefke M,Beutner M,et al.Surface Integrity Aspects of Milled Large Hardened Gears[J].Procedia CIRP,2014,13:37-42.
  • 3尹何迟,颜焕元,陈立功,倪纯珍.磁巴克豪森效应在残余应力无损检测中的研究现状及发展方向[J].无损检测,2008,30(1):34-36. 被引量:12
  • 4Wojtas A S,Suominen L,Shaw BA,et al.Detection of thermal damage in steel components after grinding using the magnetic Barkhausen noise method[J].Non-destructive Testing,1998,3(9):247-254.
  • 5朱正德.磨削烧伤检测及其评定方法[J].汽车工艺与材料,2013(8):37-39. 被引量:8
  • 6Moorthy V,Shaw B A,Evans J T.Evaluation of tempering induced changes in the hardness profile of case-carburised EN36 steel using magnetic Barkhausen noise analysis[J].NDT & E International,2003,36(1):43-49.
  • 7Tiitto S,Saynajakangas S.Spectral damping in Barkhausen noise[J].Magnetics,1975,11(6):1666-1672.
  • 8兵器工业无损检测人员技术资格鉴定委员会.常用钢材磁特性曲线速查手册[M].北京:机械工业出版社,2003:4-8.
  • 9Karpuschewski B,Bleicher O,Beutner M.Surface Integrity Inspection on Gears Using Barkhausen Noise Analysis[J].Procedia Engineering,2011,19:162-171.
  • 10小野浩二,河村末久,北野昌则,等.理论切削学[M].北京:国防工业出版社,1985:220-225.

二级参考文献18

  • 1祁欣,于石生,赵亚舒.Barkhausen效应测定铁磁材料内应力[J].哈尔滨科学技术大学学报,1993,17(3):56-59. 被引量:1
  • 2马咸尧,孙大千,李健萍.Barkhausen技术测量钢件应力探讨[J].材料工程,1994,22(5):32-34. 被引量:2
  • 3陈娟,祁欣.巴克豪森检测传感器的设计及分析[J].哈尔滨电工学院学报,1994,17(1):35-39. 被引量:6
  • 4[7]Parakka A,Jiles D C.A portable system for non-destructive testing of ferromagnetic materials[J].Journal of Magnetism and Magnetic Materials,1995,144(3):1841-1842.
  • 5[8]Zhu B,Johnson M J,Lo C C H,et al.Multifunctional magnetic barkhausen emission measurement system[J].IEEE Transactions on Magnetics,2001,37(3):1000-1006.
  • 6[9]Hartmann K,Moses A J,Meydan T.A system for measurement of AC Barkhausen noise in electrical steels[J].Journal of Magnetism and Magnetic Materials,2003,(3):318-320.
  • 7[10]Vengrinovich V,Tsukerman V,Yu Denkevich,et al.Providing with the stability of stress measurements in harsh environment by Barkhausen noise[J].Review of Progress in Quantitative Nondestructive Evaluation,2001,20(1):989-1003.
  • 8[11]Chennupati Jagadish,Lynann Clapham,David L,et al.Influence of uniaxial elastic stress on power spectrum and pulse height distribution of surface Barkhausen noise in pipeline steel[J].IEEE Transactions on Magnetics,1990,26(3):102-108.
  • 9[12]Durin G,Zapperi S.On the power spectrum of magnetization noise[J].Journal of Magnetism and Magnetic Materials,2002,245(2):1085-1088.
  • 10[13]Leszek B Magalas.Application of the wavelet trans form in mechanical spectroscopy and in Barkhausen noise analysis[J].Jounals of Alloys And Compounds,2000,310(1-2):269-275.

共引文献23

同被引文献48

引证文献3

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部