期刊文献+

油液中微量元素检测方法研究进展

Recent Advances in Trace Elements Determination of Oil Fluid
下载PDF
导出
摘要 润滑油等油液中微量元素的检测对油液的质量监控以及发动机、涡轮机和液压传动系统等机械设备的视情维修具有重要意义。但由于元素的含量通常较低,加之有机样品的前处理困难等,润滑油等油液中的微量元素检测一直是分析化学工作者面临的一个非常大的挑战。本文着重介绍了用于润滑油等油液样品的元素检测技术与样品前处理方法的一些最新发展,并对润滑油中微量元素监测的发展趋势作了展望。 Determination of trace elements in lubricant and other oils is of great significance in the monitoring of oil quality and the condition-based maintenance of mechanical equipment such as engine, turbine and hydraulic transmission system, etc. However, due to the low concentration of the elements of interest, as well as the difficulty in the pretreatment of organic samples, it has always been a great challenge to measure the trace elements in oils. In this paper, the recent progress of methods used in the detection of trace elements in oil and the pretreatment of oil samples has been reviewed. And the trends of trace elements monitoring in lubricating oil are summarized.
出处 《现代科学仪器》 2015年第5期5-12,17,共9页 Modern Scientific Instruments
关键词 润滑油 微量元素 光谱分析 视情维修 样品前处理 Lubricating oil Trace elements Spectroscopic analysis Condition-based maintenance Sample pretreatment
  • 相关文献

参考文献64

  • 1鲁毅,柳洪超,郭国建,尤瑜生,吴立军.ICP–AES法测定润滑油元素含量的前处理方法[J].化学分析计量,2013,22(6):103-106. 被引量:9
  • 2Auc61io R Q, de Souza R M, de Campos R C, et al. The determination of trace metals in lubricating oils by atomic spectrometry[J]. Spectrochimica Acta Part B: Atomic Spectroscopy. 2007, 62(9): 952-961.
  • 3周天龙,龚坚强,黎鸿举,亓高扬,唐芳,郑江宁.X射线荧光光谱法测定润滑油中22种添加剂元素和磨损金属元素[J].理化检验(化学分册),2010,46(3):279-282. 被引量:15
  • 4高致富,张锋,刘瑞鹏.浅谈造纸机润滑油金属磨粒状态监测技术[J].纸和造纸,2014,33(6):11-15. 被引量:4
  • 5Aucelio R Q, Curtius A J. Comparative study of electrothermal atomic absorption spectrometric methods for the determination of silver in used lubricating oils[J]. ANALYST. 2000, 125(9): 1673-1679.
  • 6Andrade J M, Carballo-Paradelo S, Teran-Baamonde J, et al. Multivariate calibration to implement green ETAAS methods when analysing Cu in lubricating oils[J]. ANALYTICAL METHODS. 2013, 5(16): 4039-4046.
  • 7Xiu J, Motto-Ros V, Panczer G, et al. Feasibility of wear metal analysis in oils with parts per million and sub-parts per million sensitivities using laser-induced breakdown spectroscopy of thin oil layer on metallic target[J]. Spectrochimica Acta Part B: Atomic Spectroscopy. 2014, 91: 24-30.
  • 8Pessoa H M, Lyra F H, de Castro E V R, et al. Comparison of Different Pre-treatment Procedures for the Determination of Chromium in Crude Oil Samples by GF AAS[J]. JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY. 2012, 23(8}: 1421-1428.
  • 9de Jesus A, Zmozinski A V, Damin I C F, et al. Determination of arsenic and cadmium in crude oil by direct sampling graphite furnace atomic absorption spectrometry[J]. Spectrochimica Acta Part B: Atomic Spectroscopy. 2012, 71- 72: 86-91.
  • 10Luz M S, Oliveira P V. Simultaneous determination of Cr, Fe, Ni and V in crude oil by emulsion sampling graphite furnace atomic absorption spectrometry[J]. Analytical Methods. 2011, 3(6): 1280.

二级参考文献123

共引文献75

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部