期刊文献+

齿轮驱动涡扇发动机星型齿轮减速器安装角度计算与分析 被引量:2

Calculation and Analysis of Star Gearbox Mounting Angle for Geared Turbofan
下载PDF
导出
摘要 为支撑宽体客机发动机总体方案论证,以齿轮驱动涡扇发动机5路分流星型齿轮减速器为研究对象,分析了星型齿轮减速器所受重力载荷及人字齿轮啮合时产生的扭矩对传扭支架受力的影响。在考虑重力载荷的基础上,根据啮合扭矩对星型齿轮减速器安装角度进行了计算并使用有限元软件对结果进行了验证。结果表明:当齿轮啮合扭矩为顺航向顺时针时,应使任意支架连杆处于3点钟位置;当齿轮啮合扭矩为顺航向逆时针时,应使任意支架连杆处于9点钟位置。 In order to support the scheme demonstration of a wide-body jetliner engine, the influences of gravity load and herringbone gears meshing torque to the carrier have been studied with regard to a star gearbox of five planets in a geared turbofan. Considering the gravity load of the star gearbox and the meshing torque of gears, the mounting angle of the star gearbox has been calculated and verified by finite element software. The results show that one limb should be at the 3 o'clock while meshing torque is clockwise along the aircraft body axis, and one limb should be at the 9 o'clock position while meshing torque is anticlockwise along the aircraft body axis.
出处 《航空发动机》 2015年第6期39-43,共5页 Aeroengine
关键词 星型齿轮减速器 齿轮驱动 涡扇发动机 安装角度 人字齿轮 star gearbox gear-driven turbofan engine mounting angle herringbone gear
  • 相关文献

参考文献14

二级参考文献31

  • 1聂恰耶夫.航空动力装置控制规律与特性[M].单凤桐译.北京:国防工业出版社,1999.
  • 2Graham Warwie.Pratt & Whitney gears up for the future with GTF[N]. Flight International.Nov 30 2007.
  • 3G u nter Wilfert, Bernd Kriegl, Leonhard Wald et al, CLEAN - Validation of a GTF High Speed Turbine and Integration of Heat Exchanger Technology in an Environmental Friendly Engine Concept [R].ISABE - 2005 - 1156.
  • 4Dr. Rainer Martens,MTU Aero Engines' CLAIRE Technology Program [N].MTU Aero Engine Press Briefing July 18, 2007.
  • 5Buyukataman K, Wilton S. Gearbox system design for ultra-high bypass engines[C]. Orlando, FL:26th Joint Propulsion Conference.July 16-18, 1990, AIAA 90-2152.
  • 6Lynwander P. Gear drive systems:design and application[M]. New York: M. Dekker, 1983.
  • 7Xin Qin.The selection and design of bearings for geared turbofan fan gear drive system preliminary design[D]. Cranfield Universtiy, MSc thesis, 2010.
  • 8Harris T A,. Kotzalas M N. Rolling bearing analysis[M]. 5th ed.CRC/Taylor & Francis, 2007.
  • 9高效节能发动机文集编委会.高效节能发动机文集:第2分册[M].北京:航空工业出版社,1991.
  • 10Wilfert G, Kriegl B, Scheugenpflug H, et al. Clean-validation of a high efficient low NO core, a GTFTM engine high speed turbine and an integration of a recuperator in an environmental friendly engine concept[R]. AIAA-2005- 4195.

共引文献94

同被引文献25

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部