期刊文献+

三叉杆-球笼式万向联轴器组合传动轴系统的动力学仿真研究 被引量:1

Dynamics simulation about the tripod-ball type universal coupling composite transmission shaft system
下载PDF
导出
摘要 为了解三叉杆-球笼式万向联轴器组合传动轴系统的动态特性,为以后的设计工作提供理论依据,对三叉杆-球笼式万向联轴器组合传动轴系统的滑移销、叉杆臂和钢球等关键部件进行了研究。运用ADAMS软件对三叉杆-球笼式万向联轴器组合传动轴系统建立了动力学仿真模型,并对其分别进行了无摩擦和有摩擦条件下的动力学仿真,得到了关键部件的受力曲线图和摩擦力曲线图。研究结果表明,在三叉杆-球笼式万向联轴器组合传动轴系统中,钢球受力曲线的波动和突变最大,说明钢球属于易磨损部件;相比无摩擦时的受力曲线,有摩擦时作用在各个部件上的受力曲线波动变强,更能反映出该三叉杆-球笼式万向联轴器组合传动轴系统的真实受力情况。 In order to understand the dynamic characteristics of the tripod-ball type universal coupling composite transmission shaft system and offer the theoretical basis for the further design work,the key components,such as the sliding pin,the tripod arm and the steel ball,of the tripod-ball type universal coupling composite transmission shaft system were studied. Based on ADAMS,the dynamics simulation model of the tripod-ball type universal coupling composite transmission shaft system was built,and its dynamics simulation under the condition of friction and non-frictional were carried out. Then,this part obtained the corresponding force curves and friction curves of the key components. The results indicate that in the tripod-ball type universal coupling composite transmission shaft system,the force curve of the steel ball has the largest fluctuations and mutation,it is shows that the steel ball belongs to the most easily worn parts. Compared with the force curve of no friction,the fluctuations of force curve with friction that effected on each component becomes stronger,to better reflect the real force condition of the tripod-ball type universal coupling composite transmission shaft system.
出处 《机电工程》 CAS 2015年第11期1458-1461,共4页 Journal of Mechanical & Electrical Engineering
基金 山东省自然科学基金资助项目(zR2015EM037) 山东省科技发展计划资助项目(2013GGX10305)
关键词 三叉杆-球笼式万向联轴器 传动轴系统 动态特性 the tripod-ball type universal coupling transmission shaft system dynamic characteristics
  • 相关文献

参考文献10

二级参考文献34

  • 1王晨,刘九庆.笃斯越桔机械化采收发展趋势[J].林业机械与木工设备,2007,35(1):10-11. 被引量:3
  • 2MDI公司.ADAM5用户手册[M].,..
  • 3屈维德.机械振动手册[M].北京:机械工业出版社,1989..
  • 4陈精一 蔡国忠.电脑辅助工程分析[A]..ANSYS使用指南[C].北京:铁道出版社,2001..
  • 5Urbinati F, Pennestri E. Kinematic and dynamic analyses of the tripode joint[J]. Multibody System Dynamics, 1998, 2(4): 355-367.
  • 6Watanabe K, Kawakastu T, Nakao S. Kinematic and static analyses of tripod constant velocity joints of the spherical end spider type [J]. ASME Journal of Mechanical Design, 2005, 127(6) : 1 137-1 144.
  • 7Dodge J H, Wagner E R. Tripod universal joint (end motion type)[C]. SAE Paper, 1979: 131-140.
  • 8木全圭.等速ジョィントにちける摩擦と潤滑[J].潤滑,1986,31(10):13-18.
  • 9渡邊克巳,大原卓,長岡淳,など.トリボ-ド形等速繼手の運動特性解析[J],日本機械学会論文集(C編),2000,66(650):3433-3440.
  • 10渡邊克巳,川勝勉,中尾彰一,など.トリボ-ド形等速繼手の力学特性解析[J],日本機械学会論文集(C編),2000,66(650):3441-3448.

共引文献47

同被引文献7

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部