摘要
总结特细号高密家纺面料的生产要点。以JC 4.9/4.2 905.5/(327×9)300四上一下斜纹为例,介绍其生产要点。以纺制的高质量4.9tex集聚纱为经纱;整经工序采用CGGA114B型整经机,整经速度450m/min;优选浆纱工艺和浆料配方,上浆率15%,浆纱回潮率8%;在ZAX-9100型喷气织机上织造,织机速度422r/min;最终织机效率达70.3%左右,十万纬纬停41.1根,十万纬经停17.9根。认为:最大限度地发挥各工序的作用,可以保证产品的顺利生产。
Production key points of super fine higher density home textiles fabric were summarized. JC 4.9/4.2 905.5/（327×9）300 4/1 twill fabric was taken as an example. Its production key points were intro- duced. 4.9 tex condensed yarn with higher quality was used as warp and weft. CGGAl14B warping machine was adopted in warping process. Warp speed was 450 m/rain. Sizing processing and sizing instruction were optimized. Sizing percentage was 15%. Moisture regain of sized yarn was 8%. Weaving was performed in ZAX-9100 air-jet loom. The loom speed was 422 r/min. Loom efficiency was up to about 70.3%. Weft stop per 100 thousand weft was 41.1 counts while warp stop per 100 thousand weft was 17.9 counts. It is considered that successful produc- tion can be guaranteed by making sure each process playing the most effective role.
出处
《棉纺织技术》
CAS
北大核心
2015年第12期65-67,共3页
Cotton Textile Technology
关键词
长绒棉
经纱
纬纱
整经速度
浆料配方
喷气织机
上机张力
Long Staple Cotton, Warp, Weft, Warping Speed, Size Instruction, Air-jet Loom, Loom Tension
