期刊文献+

超细WC-6Co硬质合金注射参数的优化 被引量:4

Optimization of Injection Molding Process Parameters for Ultrafine-Grained WC-6Co Cemented Carbide
原文传递
导出
摘要 采用正交实验方法研究了注射温度、注射压力、注射速度、保压压力及其交互作用对超细WC-6Co硬质合金注射成形坯质量的影响。通过直观分析和方差分析,比较了各因素影响注射坯质量的显著程度,优化了注射成形参数。结果表明:注射温度与注射压力的交互作用、注射温度与保压压力的交互作用、注射温度和注射速度对注射坯密度的影响显著;注射温度与保压压力的交互作用、注射温度与注射压力的交互作用和注射速度对注射坯抗弯强度的影响显著;台阶状圆棒的最佳注射参数组合为注射温度为100℃,注射压力为60 MPa,注射速度为40%,保压压力为20 MPa。 The influence of pivotal injection molding process parameters including injection temperature, injection and holding pressure, and injection speed on the density and strength of the as-molded ultrafine-grained WC-6Co cemented carbide specimens has been studied by orthogonal experimental design and statistical analysis. It displays that the density is significantly influenced by injection temperature's interaction with injection pressure, holding pressure and injection speed, while the strength is impacted by the injection speed and the interaction of injection temperature with holding pressure and injection pressure. As following the injection parameters of injection temperature 100℃, injection pressure 60 MPa, injection speed 40% and holding pressure 20 MPa, the stepped-cylindrical-bar specimen is of the best quality.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2015年第12期3202-3207,共6页 Rare Metal Materials and Engineering
基金 国家自然科学基金(51101021)
关键词 超细 硬质合金 注射参数 正交实验 ultrafine-grained cemented carbide injection parameter orthogonal experiment
  • 相关文献

参考文献11

  • 1German R M. Translated by Song Jiupeng(宋九鹏).Powder Injection Molding-Materials, Properties, Designs and Applications(粉末注射成形-材料、性能、设计与应用)[M].Beijing:China Machine Press,2011:1.
  • 2Dvornik M I, Zaytsev A V, Mikhailenko E A. Physics Procedia[J], 2012, 23:73.
  • 3祝宝军,曲选辉,陶颖,肖平安,秦明礼.硬质合金注射成形脱脂过程中的碳含量控制[J].中国有色金属学报,2002,12(4):791-796. 被引量:9
  • 4Liu W S, Cai Q S, Ma Y Z et al. International Journal of Refractory Metals & Hard Materials[J], 2014, 42:233.
  • 5Yang M J, German R M. International Journal of Refractory Metals & Hard Materials[J], 1998, 16:107.
  • 6范景莲,李志希,成会朝.硬质合金注射成形脱脂工艺与碳含量控制[J].稀有金属材料与工程,2006,35(1):74-77. 被引量:5
  • 7Zhu Baojun, Qu Xuanhui, Tao Ying. International Journal of Refractory Metals & Hard Materials[J], 2002, 20:389.
  • 8祝宝军,曲选辉,陶颖,肖平安,秦明礼.硬质合金注射成形注射参数的优化[J].稀有金属材料与工程,2002,31(3):232-235. 被引量:9
  • 9Fox T, Daeyong Lee. International Journal of Powder Metallurgy[J], 1990, 26(3): 233.
  • 10Lee Y, Filliben J J, Micheals R J et al. Computer Vision and Image Understanding[J], 2013, 117:532.

二级参考文献20

  • 1李益民,黄伯云,曲选辉,梁叔全,邱光汉.金属注射成形技术进展[J].稀有金属材料与工程,1996,25(1):1-4. 被引量:52
  • 2曲选辉,颜寒松,黄伯云.金属粉末注射成形粘结剂的发展[J].粉末冶金技术,1997,15(1):61-65. 被引量:45
  • 3Bruhn J,Terselius B.MPR [J],1999,1:30.
  • 4Lane P D,James P J.MPR[J],1994,7:22.
  • 5Sung H J.J of the Japan Society of Powder and Powder Metallurgy[J],1999,46(8):887.
  • 6Poniatowski D,Will G.MPR[J],1988,12:812.
  • 7Yang M J,German R M.Inter J of Refra Met &Hard Mater[J],1998,16:107.
  • 8Martyn M F,James P J.Int J of Refra Met &Hard Mater[J],1993~1994,12:61.
  • 9Fan J L,Huang B Y,Qu X H.J of Advanced Materials[J],2004,36(1):72.
  • 10Fan J L et al.Trans Nonferrous Met Soc China[J],1999,9(1):93.

共引文献18

同被引文献33

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部