期刊文献+

填料和稀释剂对环氧树脂砂浆性能的影响研究 被引量:4

Influence of Fillers and Thinner on Properties of Epoxy Mortar
下载PDF
导出
摘要 研究了磨碎玻璃纤维(MG)和轻质碳酸钙(LC)2种填料及二甲苯稀释剂对环氧树脂砂浆(EM)流动性和力学性能的影响。结果表明,MG和LC对EM的强度均有提高作用,但会导致EM流动性降低;稀释剂可有效改善EM的流动度,但会降低树脂的固化速度,并导致EM的强度降低。SEM分析表明,LC的加入提高了砂浆体系的密实度,阻碍裂纹扩展;MG纤维均匀分散在砂浆体系中,纤维的断裂和拔出吸收大量的能量,可有效分担树脂基体传递的应力。 The influence of milled glass fiber (MG) and light calcium carbonate (LC) fillers and xylene thinner on the fluidity and mechanical properties of epoxy mortar (EM) were studied. Results showed that MG and LC can improve the strength of EM, but will reduce the fluidity. Thinner can effectively improve the fluidity of EM, but will reduce the curing speed of resin and lead to decrease in the strength of EM. SEM analysis showed that LC increased the compactness of mortar system and hinder the crack extension. MG fibers dispersed in the mortar system, breakage and remove of fibers absorbed a large amount of energy, effectively shared the stress from resin matrix.
出处 《材料导报(纳米与新材料专辑)》 EI CAS 2015年第2期559-564,共6页
关键词 环氧树脂砂浆 填料 稀释剂 力学性能 流动度 epoxy mortar, filler, thinner, mechanical property, fluidity
  • 相关文献

参考文献13

  • 1Aniskevich K, Hristova J ,Jansons J. Sorption characteristics of polymer concrete during long-term exposure to water[J]. Mech Compos Mater, 2003,39 : 305.
  • 2Reis J M L, Ferreira A J M. The effects of atmospheric ex- posure on the fracture properties of polymer eonerete[J]. Building Environ, 2006,41 : 262.
  • 3Reis J M L, Ferreira A J M. Effect of marine exposure on fracture properties of epoxy concretes[J]. Polym Testing, 2005,24(1) : 121.
  • 4Haddad H, A1 Kobaisi M. Influence of moisture content on the thermal and mechanical properties and curing behavior of polymeric matrix and polymer concrete eomposite[J]. Mater Des, 2013,49 : 850.
  • 5郭文瑛.环氧树脂基修补材料配方优化研究[J].新型建筑材料,2009,36(8):58-62. 被引量:11
  • 6吴隆.聚合物混凝土床身的制造与特性分析[J].机械制造,2004,42(1):37-39. 被引量:10
  • 7高杰,胡高平,肖卫东.环氧砂浆在道路修复中的应用[J].粘接,2009,30(6):74-75. 被引量:8
  • 8Knowles E S. Glass fiber reinforced concrete cladding panels [J]. Exterior Wall Systems: Glass and Concrete Technolo- gy, Design, and Construction, 1991,1034 : 187.
  • 9Do Suh J. Design and manufacture of hybrid polymer con- crete bed for high-speed CNC milling machine[J]. Int J Mech Mater Des,2008,4(2) : 113.
  • 10周梅,刘书贤.填料品种和用量对树脂混凝土强度的影响[J].新型建筑材料,2001,28(3):4-6. 被引量:27

二级参考文献16

  • 1忻秀卿.聚合物混凝土复合材料的技术进展[J].新型建筑材料,1995,22(2):27-31. 被引量:4
  • 2陈建斌.环氧树脂砂浆及其应用[J].江西化工,2005,21(3):115-117. 被引量:13
  • 3文恒武,魏超琪,齐海丽,黄兴亮.混凝土板面裂缝的处理[J].陕西建筑,2006(7):23-25. 被引量:2
  • 4姜福田.混凝土力学性能测试[M].北京:中国铁道出版社,1986.116.
  • 5Andrea Saccani,Vittorio Magnahi.Durability of epoxy resinbased materials for the repair of damaged cementitious composite[J]. Cement and Concrete Research, 1999,29:95-98.
  • 6Hassan K E, Robery P C,A1-Alawi L.Effect of hot-dry curing environment on the intrinsic properties of repair materials[J]. Cement & Concrete Composites, 2000, 22: 453-458.
  • 7Moetaz E1-Hawary, Husain A1-Khaiat,Sami Fereig.Performance of epoxy-repaired concrete in a marine environment[J].Cement and Concrete Research, 2000, 30: 259-266.
  • 8Guoqiang Li,Neema Pourmohamadian,Adam Cygan,et al.Fast repair of laminated beams using UV curing composites[J].Composite Structures, 2003,60:73-81.
  • 9[1]SchulzH. Reaktion Sharzbeton im Maschinenbau. Werks.u. Betr, 121( 1988) 4
  • 10[2]Studer Technical Information.No.30.1989

共引文献51

同被引文献26

引证文献4

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部