期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

双爪式爬杆机器人的夹持性能分析 被引量：32

Grasping Performance Analysis of a Biped-pole-climbing Robot
下载PDF
导出
摘要 双爪式攀爬机器人已成为一类重要的和主流的攀爬机器人,这类机器人中两端手爪对攀爬对象抓夹的安全性和可靠性是攀爬的前提条件和基本要求,也是一个关键问题。基于此,在介绍自行开发的双爪式爬杆机器人Climbot之后提出这类机器人抓夹圆杆时的夹持力封闭性问题,对封闭性进行论证。分别分析机器人进行平面攀爬和空间攀爬时对支撑端夹持器产生的负载形式,建立其力平衡模型。基于该模型,计算夹持器的各种尺寸参数对夹持性能的影响,并对计算结果进行系统的分析。通过几组攀爬夹持试验对提出的夹持模型进行验证。结果对夹持器的设计和攀爬安全性的保证具有重要的参考和指导意义。 Biped climbing robots have become an important class of climbing robots, where the reliability of pole-grasping with the end grippers is a basic and critical requirement for safe climbing, and the analysis of grasping reliability is a key issue. A biped pole-climbing robot, the Climbot developed is first introduced. The problem of force-closure of grasping with the robot climbing on a round pole is presented and proved. The dynamic loads generated onto the base gripper when the robot climbs in different climbing gaits are analyzed, and the balance models are proposed, respectively, in 2D and 3D cases. Based on these models, the effect of geometric parameters of the gripper on grasping performance is analyzed. The correctness of the models and effectiveness of the corresponding analysis are verified with several grasping experiments. The results are helpful and valuable to gripper design for biped climbing robots and guarantee of grasp reliability.
作者 江励 管贻生 周雪峰 杨铁牛 苏满佳 吴鸿敏
机构地区 五邑大学机电工程学院 广东工业大学机电工程学院 广东省自动化研究所现代控制技术重点实验室
出处 《机械工程学报》 EI CAS CSCD 北大核心 2016年第3期34-40,共7页 Journal of Mechanical Engineering
基金 广东省自然科学基金(S2013020012797) 国家基金委-广东省联合基金(U1401240) 国家国际科技合作专项(2015DFA11700)资助项目
关键词 爬杆机器人 抓夹安全性 夹持力封闭 力平衡模型 夹持器设计 biped pole-climbing robot grasping safety force-closure force balance model gripper design
分类号 TP242 [自动化与计算机技术—检测技术与自动化装置]
  • 相关文献

参考文献10

  • 1ALMONACID M, SALTARENRJ, ARACILR, etal.Motion planning of a climbing parallel robot[J]. IEEETransactions on Robotics and Automation,2003,19(3):485-489.
  • 2BAGHANI A , AHMADABADI M,HARATI A.Kinematics modeling of a wheel-based pole climbingrobot (ut-pcr)[C]// In Proc. IEEE International Conferenceon Robotics and Automation, Kobe, Japan: IEEE, 2005:2111-2116.
  • 3SPENKO M J. Biologically inspired climbing with ahexapedal robotfJ]. Journal of Field Robotics,2008,25(4-5): 223-242.
  • 4LAM T L’ XU Y. Climbing strategy for a flexible treeclimbing robot~Treebot[J]. IEEE Trasactions onRobotics, 2011, 26(4): 12-23.
  • 5TAVAKOLI M ’ MARQUES L, ALMEIDA T D.3DClimber : Climbing and manipulation over 3Dstructures[J]. The Journal of Mechatronics, 2010,21:48-62.
  • 6江励,管贻生,蔡传武,朱海飞,周雪峰,张宪民.仿生攀爬机器人的步态分析[J].机械工程学报,2010,46(15):17-22. 被引量：40
  • 7NGUYEN V D. Constructing force-closure grasps[J].International Journal of Robotics Research, 1988,7(3):3-16.
  • 8TRINKLE J C. On the stability and instantaneous velocityof grasped frictlonless objects[J]. IEEE Transactions onRobotics and Automation, 1992, 8(5): 560-572.
  • 9RICHARD M M,ZEXIANQ L, SASTRY S S. Amathematical introduction to robotic manipulation[M]_Florida: CRC Press, 1994.
  • 10GOLDMAN A J, TUCKER A W. Polyhedral convexcones in linear inequality and related systems[M].Princeton: Princeton Univ. Press, 1956.

二级参考文献12

  • 1吴伟国,徐峰琳.空间桁架用双臂手移动机器人设计与仿真分析[J].机械设计与制造,2007(3):110-112. 被引量：14
  • 2ALMONACID M,SALTAREN R,ARACIL R,et al.Motion planning of a climbing parallel robot[J].IEEE Transactions on Robotics and Automation,2003,19(3):485-489.
  • 3BAGHANI A,AHMADABADI M,HARATI A.Kinematics modeling of a wheel-based pole climbing robot (UT-PCR)[C]// IEEE Int.Conf.on Robotics and Automation,April 18-22,2005,Barcelona,Spain.New York:IEEE,2005:2 111-2 116.
  • 4AUTUMN K,BUEHLER M,CUTKOSKY M,et al.Robotics in sensorial environments[C]// Proc.of SPlE,Feb.12-16,2005,Santiago,California.New York:SPIE,2005:291-302.
  • 5YEOREUM Y,DANIELA R.Shady3D:A robot that climbs 3D trusses[C]// IEEE international conference on Robotics and Automation,April 10-14,2007,Roma,Italy.New York:IEEE,2007:4 071-4 076.
  • 6WANG Wei,WANG Yingying,ZHANG Houxiang,et al.Analysis of the kinematics of module climbing caterpillar robots[C]// IEEE/ASME Int.Conf.on Advanced Intelligent Mechatronics,July 2-5,2008,Xi'an,China.New York:IEEE,2008:84-89.
  • 7üNSAL C,KILICCOTE H,PRADEEP K K.A modular self-reconfigurable bipartite robotic system:Implementation and motion planning[J].Autonomous Robots,2001,10(1):23-40.
  • 8CASTANO A,BEHAR A,WILL P M.The Conro modules for reconfigurable robots[J].IEEE/ASME Transactions on Mechatronics,2002,7(4):403-409.
  • 9GUAN Yisheng,JIANG Li,ZHANG Xianmin.Mechanical design and basic analysis of a modular robot with special climbing and manipulation functions[C]// IEEE International Conference on Robotics and Biomometics,Dec.15-18,2007,Sanya,China.New York:IEEE,2007:502-507.
  • 10GUAN Yisheng,JIANG Li,ZHANG Xianmin,et al.Development of novel robotic systems with modular methodology[C]// IEEE/RSJ International Conference on Intelligent Robots and Systems,October 10-15,2009,St.Louis,USA.New York:IEEE,2009:2 385-2 390.

共引文献39

同被引文献202

引证文献32

二级引证文献122

机械工程学报
2016年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部