期刊文献+

四配流窗口轴向柱塞泵仿真与分析 被引量:4

Simulation and Analysis of Axial Piston Pump with Four Distribition Windows
下载PDF
导出
摘要 四配流窗口轴向柱塞泵可以实现单台泵同步闭式控制两台对称执行元件液压系统,也可以直接闭式控制差动缸回路。为分析其压力、流量特性,该文根据柱塞运动特征和配流面积变化原理,运用Simulation X软件对四配流窗口轴向柱塞泵进行了建模和仿真分析。通过设置斜盘角度或转速调节液压泵输出流量,考虑油液泄漏和黏性摩擦力的情况下,对加载和空载时液压泵柱塞腔和泵油口的压力、流量等特征响应曲线进行分析。仿真结果表明,流量脉动频率随泵转速增加而增大;压力脉动幅值随负载增加而增大,且压力脉动频率与负载无关。 Two symmetrical actuators hydraulic system being synchronously controlled by single pump could be realized with axial piston pump with four distribition windows, which could also directly controlled differential cylinder in a closed-loop way. The pressure and flow characteristics were analyzed based on the single piston motion characteristics and the change of assignment area. Simulation X software was applied in the modeling and simulation analysis of axial piston pump with four distribition windows. The hydraulic pump output flow was adjusted by setting the swash plate angle or cylinder speed. Taking the oil leaks and viscous friction into consideration, the characteristic response curve of plunger cavity, oil-pumping port pressure and flow has been analyzed under the condition of load and no-load. The simulation results show that the flow pulsation frequency increases with increasing pump speed; the pressure pulsation amplitude increases as the load increases, and the pressure pulsation frequency is independent of the load.
出处 《液压气动与密封》 2016年第3期18-21,共4页 Hydraulics Pneumatics & Seals
基金 国家自然科学基金(51375324) 创新基金(Xj2015021) 新型传感器与智能控制教育部/山西省重点实验室-开放课题基金(201402)
关键词 斜盘式轴向柱塞泵 泵控液压系统 配流盘 建模 axial piston pump pump controlled hydraulic system value plate modeling
  • 相关文献

参考文献8

二级参考文献45

  • 1那成烈.三角槽节流口面积的计算[J].甘肃工业大学学报,1993,19(2):45-48. 被引量:22
  • 2郭卫东,王占林.斜盘式轴向柱塞泵实际流量的分析研究[J].北京航空航天大学学报,1996,22(2):223-227. 被引量:16
  • 3郭卫东,王占林.轴向柱塞泵柱塞腔中油液压力的分析研究[J].机床与液压,1996,24(1):18-20. 被引量:3
  • 4KOJIMA E, NAGAKURA H. Characteristics of fluid- borne noise generated by fluid power pumps[J]. Bulletin of the JSME (The 1st Mechanism of Generation of Pressure Pulsation in Axial Piston Pump), 1982, 25(199): 46-53.
  • 5ZAICHENKO I Z, BOLTYANSKII A D. Reducing noise levels of axial piston pumps[J]. Russ Engine Journal, 1969, 49(4): 21-23.
  • 6YAMAUCHI K, YMAMOTO T. Noise generated by hydraulic pump and their control method[R].Tokyo: Mitsubishi Heavy Industries Technical Report, 1975.
  • 7BOWNS D E, TOMLINSON S P, DOREY R E. Computer simulation techniques for the dynamic performance assessment of fluid power systems[C]// The 7th International Fluid Power Symposium, Sep. 16-18, Bath, UK, 1986: 81-88.
  • 8BOWNS D E, EDGE K A, CADLISH D. Factors affecting the choice of a standard method for the determination of pump pressure ripple[C]///MechE Conference Quiet Oil Hydraulic Systems, Oct., London, UK, 1980: 141-148.
  • 9EDGE K A, WING T J. Measurement of the fluid borne pressure ripple characteristics of hydraulic components[J]. Proceedings of the Institution of Mechanical Engineers, Part B- Management and Engineering Manufacturing, 1983, 197(B): 247-254.
  • 10EDGE K A, FREITAS F J T. Study of pressure fluctuations in the suction lines of positive displacement pumps[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Management and Engineering Manufacturing, 1985, 199(B4):211-217.

共引文献142

同被引文献31

引证文献4

二级引证文献36

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部