期刊文献+

高压辊磨机工艺参数对翠宏山某磁铁矿石粉碎行为的影响 被引量:4

Effect of High Pressure Grinding Roll Operation Parameters on Crushing Behavior of a Magnetite from Cuihongshan
下载PDF
导出
摘要 为研究翠宏山某磁铁矿石在高压辊磨机中的粉碎行为,考察了比压力、辊隙对产品粒度特性和比能耗的影响。结果表明:高压辊磨机破碎产品粒度均匀性和破碎比均随辊隙增加而降低,新生成-8 mm粒级比功耗随辊隙增加先降低后提高;高压辊磨机破碎产品粒度均匀性和破碎比均随比压力增加而提高,新生成-8 mm粒级比功耗随比压力增加而降低。比功耗与破碎比存在近似的线性关系。相对于辊隙,比压力对高压辊磨机破碎效果的影响更大。试验结果可以为该磁铁矿石高压辊磨工艺设备参数的确定提供依据。 In order to investigate the high pressure grinding roll crushing behavior of a magnetite from Cuihongshan,the influences of specific pressure and roll gap on the product size distribution and specific energy consumption were tested. The results showed that: with the increase of roll gap,the uniformity factor of product size increased and reduction ratio dropped;consumption for new generated-8 mm fraction reduced with the increase of roll gap; with the increase of specific pressure,both the uniformity factor of product size and reduction ratio increased; consumption for new generated-8 mm fraction reduced with the increase of specific pressure. Approximate linear relationship exists between consumption and reduction ratio. Specific pressure of high pressure roller has more effect on crushing effect compared with roll gap. Test results can provide technique basis for the determination of high pressure roller mill process equipment parameters.
出处 《金属矿山》 CAS 北大核心 2016年第4期122-125,共4页 Metal Mine
关键词 高压辊磨机 比压力 辊隙 破碎比 比功耗 High pressure grinding roll Specific pressure Roll gap Reduction ratio Specific energy consumption
  • 相关文献

参考文献3

二级参考文献13

  • 1马斌杰,游维,崔长志.高压辊磨机在铁矿石超细碎中的应用前景[J].矿山机械,2007,35(7):39-40. 被引量:14
  • 2童祜嵩,颗粒粒度与比表面积测量原理,1989年
  • 3蒋子刚,分析测试中的数理统计与质量保证,1981年
  • 4Maxton D, Morley C, Bearman R. A quantification of the benefits of high pressure rolls crushing in an operating environment[J]. Minerals Processing, 2003,16 ( 9 ) : 827 - 838.
  • 5Fuerstenau D W,Kapur P C. Newer energy-efficient approach to particle production by comminution [ J ]. Powder Technology,1995,82( 1 ) :51 -57.
  • 6Apling A, Bwalya M. Evaluating high pressure milling for liberation enhancement and energy saving [ J ]. Minerals Engineering, 1997,10 (9) : 1013 - 1022.
  • 7Kapur P C, Gutsche O. Comminution of minerals on a laboratory-sized choke-fed high-pressure roll mill [ C ]//XVIII International Mineral Processing Congress, Sydney, 1993 : 175 - 180.
  • 8Wills B A, Napier T J. Mineral processing technology [ M ]. Queensland: Elsevier Science & Technology ,2006:69 - 96.
  • 9Karihaloo B L, Abdalla H M, Xiao Q Z. Deterministic size effect in the strength of cracked concrete structures [ J ]. Cement and Concrete Research ,2006,36 ( 1 ) : 171 - 188.
  • 10van dec Meer F. High pressure grinding rolls scale-up and experiences [ C ]//XXV International Mineral Processing Congress. Brisbane,2010 : 1319 - 1330.

共引文献86

同被引文献50

引证文献4

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部