期刊文献+

点接触弹流润滑条件下的深沟球轴承表面局部缺陷动力学建模 被引量:14

Dynamics modeling on local defect of deep groove ball bearing under point contact elasto-hydrodynamic lubrication condition
下载PDF
导出
摘要 传统轴承动力学模型多为无润滑干接触状态下建立的接触力学模型,没有考虑润滑对轴承振动的影响。由于球轴承内部钢球与滚道之间润滑油膜的存在,油膜影响轴承的接触刚度。基于非线性赫兹接触变形和弹性流体润滑,提出了一种深沟球轴承局部缺陷的两自由度动力学模型。首先将接触变形、径向间隙和缺陷的连续性变化关系对轴承的局部缺陷影响提出了模拟的方法,然后加入了弹流润滑对轴承接触刚度的影响这一因素,并建立深沟球轴承的两自由度动力学模型,能更加准确的模拟轴承实际运转时的真实状态。最后通过振动响应的仿真信号与轴承故障实验台的数据进行对比,验证这种模型的准确性,为轴承故障诊断提供了理论依据。 The traditional bearing dynamics models are mostly based on dry contact mechanics,in which the effect of lubrication on bearing vibration has not been taken into account. The contact stiffness of the bearing will be affected due to the existence of lubricating oil film between the raceway and ball with local defect. Taking into account the relationship among the contact deformation,radial clearance and the defects,a simulation method for local defects was presented.Then,a two degrees of freedom dynamic model of the deep groove ball bearing was constituted with consideration of the nonlinear Hertzian contact deformation and the influence of elasto-hydrodynamic lubrication on the bearing contact stiffness. The model can simulate the actual condition of bearing operation more accurately. Comparing the signals of vibration responses in the simulation with the experiment data of actual fault bearings,the correctness of the model was verified. It could provide a theoretical foundation for fault diagnosis of bearing.
出处 《振动与冲击》 EI CSCD 北大核心 2016年第14期61-70,共10页 Journal of Vibration and Shock
基金 国家自然科学基金项目(51165018)
关键词 弹流润滑 深沟球轴承 局部缺陷 动力学模型 elasto-hydrodynamic lubrication deep-groove ball bearing local defect dynamics model
  • 相关文献

参考文献9

二级参考文献91

  • 1曹冲锋,宋京伟,王秋红.滚动轴承外圈局部故障的动态特性及计算机仿真[J].华东交通大学学报,2005,22(2):123-126. 被引量:8
  • 2杨将新,曹冲锋,曹衍龙,宋京伟.内圈局部损伤滚动轴承系统动态特性建模及仿真[J].浙江大学学报(工学版),2007,41(4):551-555. 被引量:20
  • 3Tandon N, Yadava G, Ramakrishna K. A comparison of some condition monitoring techniques for the detection of defect in induction motor bali bearings[J]. Mechanical Systems and Signal Processing, 2007, 21(1): 244- 256.
  • 4Al-Ghamd A M, Mba D. A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect size[J].Mechanical Systems and Signal Processing, 2006, 20(7): 1537 -1571.
  • 5Subrahmanyam M, Suiatha C. Using neutral networks for the diagnosis of localized defects in ball bearings[J]. Tri bology Internatoinal, 1997, 30(10): 739-752.
  • 6Liu B, Ling S F, Gribonval R. Bearing failure detection using matching pursuit [J]. NDT & E International, 2002, 35(4): 255-262.
  • 7Du Q, Yang S. Improvement of the EMD method and ap plications in defect diagnosis of ball hearings[J].Measure ment Science and Technology, 2006, 17(8): 2356 -2361.
  • 8Tandon N, Choudhury A. Review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings [J].Tribology International, 1999, 32(8): 469 -480.
  • 9Tandon N, Choudhury A. An analytical model for the prediction of the vibration response of rolling element bearing due to a localized defect[J]. Journal of Sound and Vibration, 1997, 205(3): 275-292.
  • 10Kiral Z, Karagulle H. Vibration analysis of roiling element bearing with various defects under the action of an unbalanced force[J]. Mechanical Systems and Signal Pro cessing, 2006, 20(8): 1967-1991.

共引文献135

同被引文献98

引证文献14

二级引证文献75

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部