期刊文献+

铝合金FSW和EBW焊接接头组织性能对比研究 被引量:1

Comparative Study on Microstructure and Properties of Al Alloy FSW and EBW Welded joints
原文传递
导出
摘要 FSW和EBW都十分适合用于铝合金的焊接。本文通过采用FSW和EBW两种焊接方法对8 mm厚的2219铝合金进行焊接,并对其焊接接头的组织、硬度及抗拉强度、断口形貌等进行了对比和分析。结果表明,二者的焊缝组织晶粒度均大于母材,断口均以韧性断裂为主,且EBW接头拉伸断口主要位于热影响区与母材交界处,接头抗拉强度可达到母材的97.3%;FSW接头拉伸断口位于焊缝处,抗拉强度略低于EBW。 FSW and EBVV are both suitable for welding of aluminum alloy. The welding of 2219 aluminum alloy with 8mm thickness was carried out by using FSW and EBW, and organization, hardness, tensile strength and fi-acture morphology of the welded joint were compared and investigated. The results show that, the grain sizes of weld microstructure with FSW and EBW are larger than those of the base metal, and both of the fracture are mainly performance of ductile fracture. The tensile fracture welded by EBW mainly locates in the boundary between the HAZ and base metal, and tensile strength of the welded joints can reach 97.3% of the base metal. The tensile fracture of FSW locates in the butt weld, and tensile strength of the joint is lower slightly than that of EBW.
出处 《热加工工艺》 CSCD 北大核心 2016年第13期66-68,72,共4页 Hot Working Technology
基金 国家自然科学基金资助项目(51265030) 甘肃省自然科学基金资助项目(2014GS03264)
关键词 搅拌摩擦焊 电子束焊 2219铝合金 FSW EBW 2219 aluminum alloy
  • 相关文献

参考文献6

二级参考文献24

共引文献30

同被引文献10

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部