期刊文献+

基于力学强度试验的胶结充填优化配比研究 被引量:6

Study on the Optimum Mixture Ratio of Cemented Filling Based on Mechanical Strength Tests
原文传递
导出
摘要 针对安徽某铁矿全尾砂胶结充填项目进行了单轴抗压强度试验、剪切试验、三轴压缩试验,得到不同条件参数下的抗压强度、抗剪强度和围压状态下的C,φ值,研究结果表明,砂灰比为6、砂浆浓度为72%时,在兼顾料浆输送和成本的同时,可以保证充填体的强度。 Abstract.. Aimed at the cemented filling project in an iron mine of Anhui province, mechanical strength tests were carried out, including uniaxial compressive strength test, shear test and triaxial compression test. The compre- hensive strength and shear strength under different parame- ters were obtained, as well as the C value and the φ value under confining pressures. The research results showed that the strength of filling body with sand-cement ratio of 6 and slurry concentration of 72% could be guaranteed, as well as the slurry transportation and filling cost.
出处 《矿业研究与开发》 CAS 北大核心 2016年第7期40-42,共3页 Mining Research and Development
关键词 胶结充填 全尾砂 胶结材料 力学强度 优化配比 Cemented filling, Total tailings, Cementing ma- terial, Mechanical strength, Optimum mixture ratio
  • 相关文献

参考文献9

二级参考文献74

共引文献81

同被引文献65

引证文献6

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部