期刊文献+

颈椎康热融压敏胶贴质量控制研究 被引量:1

Study on the quality control method for Jingzhuikang Plaster based on hot-melt pressure sensitive adhesives
下载PDF
导出
摘要 目的建立颈椎康热融压敏胶贴的质量检测方法。方法采用专属性薄层色谱法鉴定方中4味主药;高效液相色谱法检测该药中的主要指标成分葛根素含量。色谱条件:色谱柱:Diamonsil C_(18)柱(250 mm×4.6 mm,5μm);流动相:甲醇-水(25∶75);流速:1.0mL·min^(-1);检测波长:250nm;柱温:室温。结果薄层鉴别斑点清晰,分离效果良好,空白无干扰;葛根素含量在0.101 6~1.101 6μg范围内线性关系符合要求(r=0.999 7),方法加样回收率为100.4%,RSD为2.17%(n=6)。结论经研究建立的方法,可作为该药的质量检测手段。 Objective To establish a quality standard for Jingzhuikang Plaster based on hot-melt pressure sensitive adhesives.Methods Eucommiae cortex,Angelicae sinensis radix,Corni fructus and puerariae radix were identified by TLC.The content of puerarin in Jingzhuikang Plaster was determined by HPLC.Diamonsil C_(18)(250mm×4.6mm,5μm)column was used.The mobile phase consisted of methanol-water(25∶75)at normal flow rate.The detection wavelength was set at 250 nm.Results The spots in TLC were clear.Puerarin showed a good linear relationship within the range of 0.101 6-1.101 6μg(r=0.999 7).The average recovery was 100.4%,and the RSD was 2.17%(n=6).Conclusion The established methods can be used for Jingzhuikang Plaster quality control.
出处 《西北药学杂志》 CAS 2016年第4期360-363,共4页 Northwest Pharmaceutical Journal
关键词 葛根素 颈椎康热融压敏胶贴 质量标准 HPLC TLC puerarin Jingzhuikang Plaster based on hot-melt pressure sensitive adhesives quality control HPLC TLC
  • 相关文献

参考文献15

二级参考文献107

共引文献135

同被引文献8

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部