摘要
以某8 000 TEU集装箱船为研究对象,利用有限元法在ANASYS中建立船体模型。通过设计浪频、浪向、波高与相位对轴承垂向偏移影响的正交仿真计算,利用极差分析法、层次分析法和模糊综合评判法对仿真计算结果进行分析,结果表明,这4种因素对轴承垂向偏移的影响程度为浪频∶浪向∶波高∶相位=0.303∶0.071∶0.533∶0.093;在海浪的影响下,靠近主机的两个中间轴承的相对垂向偏移最大。为了进一步分析波浪对轴承负荷的影响,利用轴系校中理论,计算得到轴承在有无海浪影响下的负荷大小并进行比较,结果表明大型船舶在海浪中行驶时,对尾轴承负荷的影响较大,在轴系校中计算中应予以关注。
The hull model of an 8 000 TEU container vessel is established with Finite Element Method （FEM） in ANASYS. An orthogonal simulation calculation in which the influence of wave frequency, wave direction, wave height and phase on the vertical migration of bearing is designed and analyzed with range analysis, AHP （Analytic Hierarchy Process） and fuzzy comprehensive evaluation methods. The results show that important degree about the four factors impacting bearing vertical migration is wave frequency .＂ wave direction ,＂ wave height ：phase=0.303 ： 0.071 ： 0.533 ：0.093. Under the influence of the wave, the relative vertical migrations of the two intermediate bearings close to the main engine are larger than others. Two kinds of the bearing load under both the wave and no wave conditions are respectively calculated and compared with shafting alignment theory in order to analyze the wave influence on the bearing load further. The results indicate that when large-scale vessels voyage in wave, the wave influence on the tail bearing is bigger and shouM be noted in shafting alignment calculation.
出处
《船舶工程》
北大核心
2016年第7期27-30,共4页
Ship Engineering
基金
国家自然科学基金项目(51139005
51379168)
关键词
极差分析
层次分析法
模糊综合评判法
轴系校中
range analysis
AHP
fuzzy comprehensive evaluation method
shafting alignment
