摘要
目的 探讨使用生化分析仪等仪器设备前的灭菌操作规范及灭菌过程中问题的处理方法。方法 选取2015年8~9月该院800次生化分析仪等仪器设备使用过程中的相关资料进行分析,分析生化分析仪等仪器设备使用前的灭菌规范及灭菌过程中问题的处理方法及处理效果。结果 规范后仪器设备服务达标率为90.00%,灭菌达标率为92.50%,仪器设备管理达标率为90.00%,显著高于规范前的62.50%、67.50%、72.50%,差异均有统计学意义（P〈0.05）;规范化消毒供应中心对仪器设备灭菌满意率为95.00%,显著高于规范前85.00%,差异有统计学意义（P〈0.05）。结论 生化分析仪等仪器设备使用前灭菌过程中存在的问题较多,应该严格按照灭菌操作规范进行处理,提高仪器设备的灭菌效果。
Objective To investigate the treatment methods of the problems in sterilization operation specification of the instru‐ments such as biochemical analyzer and sterilization process .Methods The related data of the use process of the instruments such as the 800‐times biochemical analyzer in our hospital from September 2015 to August 2015 were analyzed ,including the treatment methods and treatment effects of the problems of the sterilization operation specification before use and during the sterilization process .Results The service standard reaching rate after specification was 90 .00% ,the sterilization standard reaching rate was 90 .00% ,the standard reaching rate of instrument and equipment management was 90 .0% ,which were significantly higher than 62 .50% ,67 .50% and 72 .50% before implementing the specification ,and the differences were statistically significant（P〈0 .05）;the satisfaction rate of the specification sterilization center on the instrument sterilization was 95 .00% ,which was significantly higher than 85 .00% before implementing the specification ,and the difference was statistically significant（P〈0 .05） .Conclusion There are many problems in the use process of the instruments such as biochemical analyzer ,which should be treated strictly ac‐cording to the sterilization operation specification for improving the sterilization effect of instruments and equipments .
出处
《检验医学与临床》
CAS
2016年第15期2132-2133,共2页
Laboratory Medicine and Clinic
关键词
生化分析仪
仪器设备
灭菌操作规范
处理方法
biochemical analyzer
instrument and equipment
sterilization operation specification
processing method
