期刊文献+

有限变形下闭孔泡沫铝的非线性压缩行为

Nonlinear compressive behaviors of closed-cell aluminum-alloy foams at finite deformation
原文传递
导出
摘要 基于Huang(北京大学)和Wang(北京大学)的理论和热力学第二定律,研究了有限变形下闭孔泡沫铝的非线性压缩行为。通过引入内变量及内变量的演化方程,给出了有限变形下同时考虑细观结构参数和黏性效应的有效幂律势函数及相应的应力表达式。基于所提出的理论模型,通过算例讨论了细观力学方法、孔隙度和黏性效应对泡沫铝应力-应变曲线的影响规律。结果表明:模型预测与实验结果基本一致,且随着黏性系数的增大,考虑黏性效应的模型预测趋向于未考虑黏性效应时的模型预测。 Based on Huang(Peking University)and Wang(Peking University)’s theory as well as the second thermodynamic law,the nonlinear compressive behaviors of closed-cell aluminum-alloy foams were studied at finite deformation.By means of introducing the internal variable and evolution equations of internal variable,the expressions of effective power-law potentials and stresses were presented whick taks meso-structural parameter and viscosity effect into consideration.With the presented theoretical models,some numerical examples were conducted to analyze the influences of micromechanics approaches,porosity and viscosity effect on the stress-strain curves of aluminum foams.The results show that the model predictions are basically agree with the experimental result.In addition,it is found that the model predictions considering the viscosity effect tend to the model predictions without considering the viscosity effect when the viscous coefficient becomes larger.
作者 陈伟 卢子兴
出处 《复合材料学报》 EI CAS CSCD 北大核心 2016年第8期1749-1754,共6页 Acta Materiae Compositae Sinica
基金 国家自然科学基金(11472025)
关键词 球形闭孔高密度泡沫铝 有限变形 有效幂律势函数 非线性力学行为 黏性 spherical closed-cell high density aluminum-alloy foams finite deformation effective power-law potentials nonlinear mechanical behaviors viscosity
  • 相关文献

参考文献16

  • 1HARTE A M,FLECK N A,ASHBY M F.Fatigue failure of an open cell and a closed cell aluminium alloy foam[J].Acta Materialia,1999,47(8): 2511-2524.
  • 2DESHPANDE V S,FLECK N A.Isotropic constitutive models for metallic foams[J].Journal of Mechanics and Physics of Solids,2000,48(6-7): 1253-1283.
  • 3MA G W,YE Z Q,SHAO Z S.Modeling loading rate effect on crushing stress of metallic cellular materials[J].International Journal of Impact Engineering,2009,36(6): 775-782.
  • 4MOTZ C,PIPPAN R.Deformation behaviour of closed-cell aluminium foams in tension[J].Acta Materialia,2001,49(13): 2463-2470.
  • 5HAN F S,ZHU Z G.The mechanical behavior of foamed aluminum[J].Journal of Materials Science,1999,34(2): 291-299.
  • 6PAPADOPOULOS D P,KONSTANTINIDIS I C,PAPANASTASIOU N,et al.Mechanical properties of Al metal foams[J].Materials Letters,2004,58(21): 2574-2578.
  • 7王展光,尚金堂,何思渊,何德坪,单建.球形孔泡沫铝合金压缩性能与理论模型[J].材料热处理学报,2006,27(6):129-133. 被引量:7
  • 8LU Z X,GAO Z T.Theoretical prediction for Young's modulus and yield strength of high-density foamed plastics[J].Science in China Series E: Technological Sciences,1997,27(4): 318-324.
  • 9尚艳军,卢天健,陈常青.球形闭孔泡沫金属材料力学行为研究[J].固体力学学报,2009,30(4):325-332. 被引量:7
  • 10张健,赵桂平,卢天健.闭孔泡沫铝应变率效应的试验和有限元分析[J].西安交通大学学报,2010,44(5):97-101. 被引量:32

二级参考文献20

共引文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部