摘要
为了减少农机作业对农田土壤的压实,改善作物生长环境,加强农机与农艺融合,该文结合固定道和保护性耕作技术要求,开发了固定道小麦免少耕播种机,设计了一种楔刀型开沟器与"Y"型、"L"型刀具相结合的防堵开沟装置,并确定了"Y"型、"L"型刀具等关键部件的参数,田间对比试验表明,所设计的固定道小麦免少耕播种机通过性能良好,各项指标满足免耕播种机设计要求。固定道模式下机具各项性能指标均略优于非固定道,种、肥深度合格率均达到84%以上,且一致性好,种肥间距加大5 mm,合格率达到85.2%,有效减少了烧种现象。固定道免少耕作业实施2年后,与非固定道作业模式相比,作业油耗降低22.01%,节油效果显著。因此,固定道免少耕播种技术能够提高播种质量,降低作业功耗。另外,随着中国土地流转政策地推进,研究成果将对土地规模化种植、高效化管理具有一定指导意义。
During the operation of agricultural machinery, farmland soil compaction caused by the combination weight of tractor and implements resulted in reduction of soil porosity and increase of soil bulk density, which have a negative effect on soil tilth. The controlled traffic conservation tillage is the combination of controlled traffic tillage and conservation tillage, a tillage system takes measures as follows： straw mulching, seeding in no-till or minimum-till field, and separating the crop growth zone from the tractor track. To reduce soil compaction, improve the environmental conditions for plant growth and strengthen the technology convergence of agricultural machinery and agronomy, a no and minimum-till wheat planter for controlled traffic tillage was developed based on the requirements of mechanized conservation tillage technology. This individual profiling planter consists of a frame, straw chopping devices for anti-blocking, wedge-shaped openers for fertilization, double-disk openers for seeding, and seed fertilizer boxes. The anti-blocking straw chopping devices was combined by a wedge shaped opener with Y and L type blades. The opener＇s blade front edge embedded into Y type blades＇ front fork（overlap depth is about 10 mm）. But the two edges are non-interference. Y type blades crushed straw while kicking out the straw and stubble from opener shanks. L type blades are equipped on both sides of the opener＇s front edge, the included angle α of Y-type blade was set to 120° and L-type blade Φ was designed to 120°. Each opener has three sets of blades（three Y type blades and six L type blades）. While the planter is working, the tractor would pull the planter with a forward speed of 3-5 km/h. The tractor tires and land wheels of planter would roll on the tractor track. Power from the tractor PTO shaft is transmitted to the driver cutter shaft trough the gearbox and power transmission system. The rotating cutter shaft would lead to the high-speed rotation of flails which chop the straws to help the wedge-shaped openers with furrowing and fertilizing. Subsequently, a double-disk opener would do the second-furrowing to accomplish seeding,pressing and soil-covering. A field experiment was conducted on June, 2011 in the conservation tillage experimental field located in Zhuozhou city, Hebei province. During the experiment, the planter showed stable working performance and good passing ability. The results also indicated that this planter could plant effectively under no and minimum-till, and all the indicators met the design requirements for no-till planter. According to the comparison experiments on two treatments, the controlled traffic tillage and uncontrolled traffic tillage, it was concluded that all the performance indicators under the controlled traffic tillage system were slightly superior to the ones under uncontrolled traffic tillage system, although the no and minimum till planter designed for controlled traffic tillage could also meet the seeding requirements under uncontrolled traffic tillage system. For controlled traffic tillage system, the average seeding depth was 3.6 cm with a qualified rate of 87.9%, and the average fertilizer application depth was 8.2 cm with a qualified rate of 84.8%, which met the design requirements.The two-year experiment results indicated that, compared with the uncontrolled traffic tillage, the controlled traffic tillage could save fuel consumption by 22.49% because of better tire adhesion. It might proved that the controlled traffic conservation tillage technology could improve the soil structure and reduce the costs significantly. Controlled traffic no and minimum-till seeding technique is a technology which not only improve the seeding quality, but also save the fuel, and finally realize the energy conservation and emission reduction. With the promotion of land circulation policy, this research result could be of value for the scale cultivation and efficient management of land.
出处
《农业工程学报》
EI
CAS
CSCD
北大核心
2016年第17期12-17,共6页
Transactions of the Chinese Society of Agricultural Engineering
基金
The Program for Changjiang Scholars and Innovative Research Team in University of China(IRT13039)
The Special Fund for Agro-scientific Research in the Public Interest from the Ministry of Agriculture,China(201503136)
关键词
农业机械
设计
作物
固定道
保护性耕作
播种机
油耗
agriculture machinery
design
crops
controlled traffic
conservation tillage
seeder
fuel consumption
