期刊文献+

电解法处理电镀含铜废水的实验研究 被引量:10

Treatment of Copper-containing Wastewater by Electrolysis Method
下载PDF
导出
摘要 电解法用于处理电镀含铜废水,具有高效,操作简单等特点。采用某企业含铜电镀废水,研究了电流密度,电解时间以及进水浓度等参数对铜离子去除效率的影响,并对处理成本进行了分析。结果表明,在电流密度为1.5 A/dm^2,铜离子质量浓度为31.76 mg/L,电解t达到2 h时,铜离子去除率可以达到98%以上;铜离子质量浓度为1867.16 mg/L,在电流密度为3.0 A/dm^2,电解t达到2 h时,铜离子去除率可以达到99%以上。 Electrolysis method is an effective method for treating copper-containing wastewater with characteristics of high-efficiency and easy operation. In this paper, taking copper containing electroplating wastewater from a certain enterprise as the research object, effects of current density, electrolysis time and copper ion concentration on copper ion removal efficiency were investigated, and the treating cost was analyzed. Results showed that the removal efficiency could reach up to more than 98% when the current density was 1.5 A/dm^2 ,the copper ion mass concentration was 31.76 mg/L and the electrolysis time was 2 h; the removal efficiency could reach up to more than 99% when the current density was 3.0A/dm^2 ,the copper ion mass concentration was 1 867.16 mg/L and the electrolysis time was 2 h.
作者 曾淼 冯凯莉 叶晨皓 武小鹰 ZENG Miao FENG Kaili YE Chenhao(Shangyi Environmental Protection Science and Technology Co. Ltd. , Hangzhou 310000, China China Jiliang University, Hangzhou 310018, China)
出处 《电镀与精饰》 CAS 北大核心 2016年第11期43-46,共4页 Plating & Finishing
基金 浙江省自然科学基金(Y12E080124)
关键词 电解法 含铜废水 去除率 electrolysis method copper-containing wastewater removal rate
  • 相关文献

参考文献7

二级参考文献87

共引文献327

同被引文献138

引证文献10

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部