期刊文献+

阻尼硅橡胶的动态性能研究 被引量:4

Study on the Dynamic Properties of Damping Silicone Rubber
下载PDF
导出
摘要 利用橡胶加工分析仪表征了SE2045和SE2065两种阻尼硅橡胶在不同温度、频率及应变下的动态性能。结果表明:SE2045的加工性能好于SE2065,而物理性能不如SE2065;两种阻尼硅橡胶的弹性模量(G′)、黏性模量(G″)和介质损耗因数(tanδ)随着温度的升高逐渐减小;随着频率的增加逐渐增大;SE2065的阻尼性能tan6在应变为1%~20%范围内,随着应变的增加先降后增,SE2045的阻尼性能则降低一定程度后趋于平稳。 The dynamic properties of two damping ferent temperature, frequency and strain were studied show that the proeessability of SE2045 silicone rubber silicone rubbers (SE2045 and SE2065 ) under the dif- by RPA2000, a rubber processability tester. Results is better than that of SE2065 silicone rubber, but its physical performance is worse than that of SE2065 silicone rubber. With the increasing temperature, the elastic modulus G′, viscous modulus G″ and tanδ of both rubbers decrease, but increase with the increasing frequency. With the increasing of strain tanδ of SE2065 decreases at first and then increases when the strain is between 1% -20% , tanδ of SE2045 decreases at first and then keeps steady.
出处 《有机硅材料》 CAS 2016年第6期460-464,共5页 Silicone Material
关键词 硅橡胶 RPA2000 弹性模量 黏性模量 阻尼 silicone rubber, RPA2000, elastic modulus, viscous modulus, damping
  • 相关文献

参考文献2

二级参考文献35

  • 1[25]E. Guth and O. Gold, Phys. Rev. 53, 322(1938).
  • 2[26]F. Eirich, Science and Technology of Rubber, ch. 6. "Rheological behavior of unvulcanized rubber, "by J. White, 1978, Academic Press, p. 267.
  • 3[27]J. Mark, B. Erman and F. Eirich, chapter 8 by A. medalia and G.Kraus, Scicnce and Technology of Rubber, Academic Press, 1994,p.400.
  • 4[28]Pliskin and Tokita, J. of Appl. Polymer Sci., 16, (473) 1972.
  • 5[1]J.S. Dick, Part V, "How technological innovation has affected the tire industry' s structure, "Elastomerics, January, 1981, p. 25.
  • 6[2]A. Patel and E. Weaver, "Experiment to characterize carbon black via capillary rheometers, "presented at the ACS Rubber Division,October, 1987, paper 16.
  • 7[3]W. Brown and A. Patel, "Characterization of carbon black,"presented at the ACS Rubber Division, October, 1985, paper 78.
  • 8[4]A. Patel, "Rheometry: A tool for predicting carbon black performance in rubber," Carbon Blackboard, Ashland Chemicals,Dec. 1981.
  • 9[5]J.S. Dick and H. Pawlowski, "Applications for the rubber process analyzer, "Rubber and Plastics News, April 26 and May 10, 1993.
  • 10[6]H.A. Pawlowski and J.S, Dick ,"A new dynamic mechanical tester designed for testing rubber, "May 1992.

共引文献16

同被引文献36

引证文献4

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部