期刊文献+

重型卧式车床主轴系统热特性分析 被引量:7

Thermal Characteristics Analysis of the Spindle System of Heavy Duty Horizontal Lathe
下载PDF
导出
摘要 主轴系统的热特性对重型卧式车床的加工精度有重要的影响。以某型号重型卧式车床的主轴系统为主要研究对象,采用有限元热-固耦合方法,仿真计算了主轴系统达到热平衡状态后的温度场分布和热变形特性,分析了热变形导致主轴中心线偏移情况。结合主轴系统静压轴承的结构特点,分析了轴承转速、液压油粘度、油膜间隙和供油压力对主轴系统变形场的影响。结果表明,这些因素对主轴系统的变形场有不同程度的影响,为主轴系统优化设计和热误差补偿提供了理论依据。 The thermal characteristics of the spindle system has a significant influence on the machining accuracy of the heavy horizontal lathe. The major research object is the spindle system of heavy horizontal lathe. Based on the thermoset coupling analysis of the finite element method, the temperature field and thermal deformation field of the spindle system after reaching the thermal equilibrium state is simulated. And the shift of the spindle's center line that thermal deformation has led is analyzed. According to the structural characteristics of the hydrostatic bearing, the effect of the rotational speed of bearing, viscosity of hydraulic oil, the thickness of the hydrostatic oil film and the oil supply pressure to the thermal deformation of the spindle system are analyzed. The results show that all the factors have different-level influences on the deformation field of the spindle system, and therefore provide a reference for the optimal design and thermal error compensation of the spindle system.
出处 《电子科技大学学报》 EI CAS CSCD 北大核心 2016年第6期1020-1026,共7页 Journal of University of Electronic Science and Technology of China
基金 国家科技计划(2013ZX04013-011-05) 国家自然科学基金(51275078)
关键词 变形场 有限元法 重型卧式车床 主轴系统 温度场 deformation field finite element method heavy duty horizontal lathe spindle system temperature field
  • 相关文献

参考文献3

二级参考文献14

  • 1李永祥,杨建国.灰色系统模型在机床热误差建模中的应用[J].中国机械工程,2006,17(23):2439-2442. 被引量:25
  • 2Yang Hong, Ni Jun. Dynamic Neural Network Modeling for Nonlinear, Nonstationary Machine Tool Thermally Induced Error[J]. International Journal of Machine Tools and Manufacture, 2005,45 (4/5) : 455-465.
  • 3Kim Jongjin,Jeong Younghun,Cho Dongwoo. Thermal Behavior of a Machine Tool Equipped with Linear Motors [J]. International Journal of Machine Tools and Manufacture, 2004,44 (7/8) : 749-758.
  • 4Yang Seunghan, Kim Kihoon, Park Yong Kuk. Measurement of Spindle Thermal Errors in Machine Tool Using Hemispherical Ball Bar Test[J].International Journal of Machine Tools and Manufacture, 2004,44(2/3):333-340.
  • 5Wu Chenghsien,Kung Yutai. Thermal Analysis for the Feed Drive System of a CNC Machine Center [J]. International Journal of Machine Tools and Manufacture, 2003,43 (15) :1521-1528.
  • 6M. Mori, I-I. Mizuguchi, M. Fujishima, et al. Design opti- mization and development of CNC lathe headstock to mini- mize thermal deformation [ J]. Manufacturing Technology, 2009,58:331 - 334.
  • 7Jong-Jin Kim, Young Hun Jeong, Dong-Woo Cho. Thermal behavior of a machine tool equipped with linear motors[J].International Journal of Machine Tools & Manufacture, 2004,44:749 - 758.
  • 8Cheng-Hsien Wu, Yu-Tai Kung. Thermal analysis for the feed drive system of a CNC machine center[ J ]. Internation- al Journal of Machine Tools & Manufacture, 2003,43 : 1521 - 1528.
  • 9Jin Kyung Choi, Dai Gil Lee. Thermal characteristics of the Spindle Bearing system with a gear located on the bearing span[ J] , International Journal of Machine Tools & Manufac- ture, 1998,38:1017 - 1030.
  • 10吴玉厚.数控机床电主轴单元技术[M].北京:机械工业出版社,1998.

共引文献17

同被引文献58

引证文献7

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部