期刊文献+

刀具在航空壳体高速切削中的影响研究 被引量:2

Research on the Influence of Cutting Tool in High Speed Cutting of Aviation House
下载PDF
导出
摘要 高速切削作为一种高效切削的加工方法在航空领域中已广泛应用。影响高速切削的因素非常多,其中刀具对于高速切削有着重要的影响,刀具自身的结构、材料和几何参数,刀具的夹持系统以及加工工艺等直接影响高速切削的效率。通过对刀具自身相关参数及与刀具相关的因素进行分析,结合航空壳体零件在实际加工中的应用实例,进一步掌握刀具在高速切削中的影响,从而提升高速切削在实际应用中的效果,降低企业的加工成本。 The high speed machining, as a kind of high efficiency machining method, has been widely used in the avia-tion field. There are many factors affect the high-speed cutting. As an important part of high speed cutting, the cutting toolhas the important influence on high speed machining. From the structure, material and geometric parameters of the tool, theclamping system and the machining process of the cutter directly affect the efficiency of the high speed machining. By the a-nalysis of the factors related to tool parameters and cutting tool, combined with aero shell parts application examples in actu-al processing, further understand the influence of tools in high speed cutting, so as to enhance the quick cutting effect in thepractical application, and reduce the processing cost of the enterprise.
作者 石晓飞
出处 《新技术新工艺》 2016年第12期34-37,共4页 New Technology & New Process
关键词 高速切削 刀具 刀具夹持系统 航空壳体 high speed cutting, tool, tool holder system, aviation house
  • 相关文献

参考文献3

二级参考文献29

  • 1马玉平,向道辉,陈明,孙方宏.微小孔加工试验及刀具磨损机理[J].南京航空航天大学学报,2005,37(B11):8-11. 被引量:3
  • 2杨贵军,杨跃军,陈明,孙方宏,胡祖光,励政伟,祝新发,许辉.新型T iCN涂层钻头的磨损机理[J].上海交通大学学报,2005,39(11):1741-1745. 被引量:6
  • 3沈中,刘钢,陈明.DEVELOPMENT AND EXPERIMENT OF NEW AlTiN COATED DRILLS FOR HIGH EFFICIENCY DRY DRILLING OF 40Cr[J].Transactions of Nanjing University of Aeronautics and Astronautics,2007,24(2):106-111. 被引量:4
  • 4RODOLFO E. Haber, JOSE E. Jimenez, PERES C. Ronei, et al. An Investigation of Tool-wear Monitoring in a High-speed Machining Process [J]. Sensors and Actuators, 2009, 116(3) : 539 - 545.
  • 5CHEN M, LIU G, ZHANG X H. Optimization Studies on Holemaking Tools for High-performance Cutting Austenitie Stainless Steel [ J ]. Machining Science and Technology, 2007, 11 (2) : 183 - 200.
  • 6LIU G, CHEN M, JING L L, HU Z G, et al. The Development of Special Drills for High-Efficient Drilling Austenitic Stainless Steel- Part I: Drill Comparison and Experiment Research [ C]//Key En- gineering Materials, 2006:315 - 316 : 195 - 199.
  • 7CHEN M, LIU G; JING L L, et al. The Development of Special Drills for High-efficient Drilling Austenltic Stainless Steel-Part II: Coating Selection and Experiment Research [ C ]//Key Engineer- ing Materials, 2006:315-316:200-204.
  • 8CHEN M, LIU G, JING L L, et al. Studies on the Specific Drills for Austenitic Stainless Steel 1Cr18Ni9Ti [ J ]. Journal of Computer Applications in Technology, 2007, 28( 1 ) : 103 - 109.
  • 9MAY P, SUN F H, XUE H G, et al. Deposition and Characterization of Nanocrystalline Diamond Films on Co-cemented Tungsten carbide Inserts [J]. Diamond and Related Materials, 2007, 16 (3) : 481 -485.
  • 10JIAN X G, CHEN M, SUN F H, et al. Study on the Effects of Substrate Grain Size on Diamond Thin Films Deposited on Tungsten Carbide Substrates [ J ]. Advances in Engineering Plasticity and its Applications, 2004, 274 - 276 : 1137 - 1142.

共引文献13

同被引文献11

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部