期刊文献+

液压卷扬系统失速故障的仿真研究 被引量:1

Simulation for Fault Diagnosis of Hydraulic Winch System Stall
下载PDF
导出
摘要 针对旋挖钻机卷扬系统发生多次失速故障,从现场反馈和卷扬系统液压原理入手,分析故障产生原因,利用卷扬系统的数学模型进行理论分析,并通过AMESim软件建立液压卷扬系统仿真模型验证理论分析,得出诱发失速的关键因素和参数。理论分析和仿真验证显示,卷扬负载急剧变化及马达提升侧单向溢流安全阀开启后无法关闭和下放侧补油不足都将引发卷扬系统失速,主阀稳态液动力是导致液压马达提升侧单向溢流安全阀开启后无法关闭的根本原因。根据仿真分析结果,液压马达提升侧单向溢流安全阀开启压力应大于该侧最大稳定压力的1.9倍。该研究为液压卷扬系统优化设计和故障诊断提供依据。 In terms of the phenomenon that the rotary drilling rig winch system stall fault occurs repeatedly, and based on the principles of the fault feedback and hydraulic principle of winch system, the mathematical model of the winch system is used to theoretically analyze the cause of the fault. The theoretical analysis is verified by the software AMESim after we establish the simulation model of the hydraulic winch system. Besides, the key factors and parameters are derived. The results of the theoretical analysis and simulation verification show that the factors mainly include the followings: the dramatic load change and the failure in the close of the hydraulic motor lifting side cartridge one-way relief valve after the open of the hydraulic motor and the lowering side oil-filling shortage. Additionally, the root cause of the failure lies in steady-state hydrodynamic force. According to the simulation results, the opening pressure for the hydraulic motor lifting side cartridge one-way relief valve should be more than 1.9 times of the pressure of the maximum stable side. This study provides a good basis for the optimal design and fault diagnosis of hydraulic winch system.
出处 《液压与气动》 北大核心 2016年第12期37-45,共9页 Chinese Hydraulics & Pneumatics
基金 国家高技术研究发展计划(2014AA06A614)
关键词 平衡阀 单向溢流安全阀 液压马达失速 卷扬系统 AMESIM counterbalance valve, cartridge one-way relief valve, hydraulic motor stall, winch system, AMESim
  • 相关文献

参考文献5

二级参考文献31

  • 1周小峰,李自光,颜荣庆,彭勇.功率键合图在新型组合式平衡阀动态特性中的应用[J].中国工程机械学报,2005,3(3):293-296. 被引量:5
  • 2李鄂民.超越负载的液压平衡方法[J].机床与液压,2005,33(12):102-103. 被引量:15
  • 3贺小峰,何海洋,刘银水,李壮云,王学兵.先导式水压溢流阀动态特性的仿真[J].机械工程学报,2006,42(1):75-80. 被引量:47
  • 4麻井伟,姚平喜.一种新型负载敏感平衡阀[J].液压气动与密封,2007,27(2):19-21. 被引量:17
  • 5李壮云,葛宜远.液压元件与系统[M].北京:机械工业出版社,2004.
  • 6付永领,祁晓野.LMSImagine.LabAMESim系统建模和仿真参考手册[M].北京:北京航空航天大学出版社,2011,.
  • 7Alirand M, Favennec G, Lebrun M. Pressure components stability analysis: a revisited approach[ J] . International Journal of Fluid Power, 2002, 1 (3) : 27 - 38.
  • 8Askar D, Mrut Hyunjaya T S. A Newton-Euler formulation for the inverse dynamics of the Stewart platform manipulator [ J]. Mechanism and Machine Theory, 1998, 33(8) : 1 135 - 1 152.
  • 9Peder Pedersen. Strategies for stabilization of flow control system with counter balance valves [ C ]. Proceeding of 2001 Drives and Controls and Power Electronics Conference, London : March, 2001:32-39.
  • 10梁宏喜.液压平衡阀动态特性的数值解析[D].兰州理工大学,2007.

共引文献69

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部