期刊文献+

铸态50Cr5MoV钢的动态再结晶行为分析

Analysis of Dynamic Recrystallization Behaviour of As-cast 50Cr5MoV Steel
下载PDF
导出
摘要 采用Gleeble-3800热模拟实验机对铸态50Cr5MoV钢进行热压缩实验,研究其在变形温度为900℃、950℃、1 000℃、1 050℃、1 100℃和应变速率为0.01 s-1、0.1 s-1、1 s-1条件下的动态再结晶行为。结果表明:铸态50Cr5MoV钢在热变形过程中发生了动态再结晶,且随着应变速率的降低以及变形温度的升高,动态再结晶越容易发生。 By using Gleeble-3800 thermomechanical simulator, the hot compression test for as-cast 50Cr5MoV steel has been carried out. Under conditions of the deformation temperature of 900℃, 950℃, 1 000℃, 1 050℃ and 1 100℃and the strain rate of 0.01 s -1 , 0. 1 s -1, 1 s -1, the dynamic recrystallization behaviour of steel has been studied. The results show that the dynamic recrystallization appears during the hot deformation process of as-cast 50Cr5MoV steel. And the dynamic recrystallization is more likely to appear along with the reducing of the strain rate and the increasing of the deformation temperature.
出处 《大型铸锻件》 2017年第1期7-11,共5页 Heavy Casting and Forging
关键词 铸态50Cr5MoV钢 动态再结晶 本构方程 临界应变模型 as-cast 50CrSMoV steel dynamic recrystallization constitutive equation critical strain model
  • 相关文献

参考文献6

二级参考文献71

  • 1王亦工,冯运莉.V-N微合金化提高低合金结构钢强韧性研究[J].金属热处理,2005,30(9):27-30. 被引量:16
  • 2Atsuhiko Yoshie, Takashi Fujita, Masaaki Fujioka. Effect of dislocation density in an unrecrystallized part of austenite on growth rate of recrystallizing grain[ J]. ISIJ International, 1996, 36(4) : 444 -450.
  • 3CHO Sang-hyun, KANG Ki-bong, Jonas J J. Mathematica! modeling of the recrystallization kinetics of Nb microalloyed steel[ J]. ISIJ International, 2001,41(7) : 766 -773.
  • 4McQueen H J, Yue S, Ryan N D. Hot working characteristics of steels in austenitics stat[ J]. J Mater Process Technol, 1995, 53 (1/2) : 293 - 310.
  • 5Shi H, Mclaren A J, Sellars C M. Constitutive equations for high temperature flow stress of aluminum alloys [ J]. Mater Sci Technol, 1997, 13 (3) : 210 -216.
  • 6Sellars C M, Tegart W J M. On the mechanism of hot deformation[J]. Acta Metallurgica, 1996, 14(9) : 1136 -1138.
  • 7McQueen H J, Ryan N D. Constitutive analysis in hot working[J]. Mater Sci Eng A, 2002, 322:43 -46.
  • 8Gronostajski Z J. Model describing the characteristic values of flow stress and strain of brass M63 and aluminium bronze BA93 [ J]. Journal of Materials Processing Technology, 1998, 78 : 84 - 89.
  • 9Imbert C A C, McQueen H J. Peak strength, strain hardening and dynamic restoration of A2 and M2 tool steels in hot deformation [ J]. Mater Sci Eng A, 2001, 313:88-103.
  • 10Glowacki M, Kuziak P, Pietrzyk M. Modelling of heat transfer, plastic flow and microstructural evolution during shape rolling [ J ]. Journal of Materials Processing Technology, 1995, 53 (122) : 159 - 166.

共引文献64

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部