期刊文献+

镁合金表面冷喷涂纳米铝锌涂层及其腐蚀性能研究 被引量:8

Study on Corrosion Behavior of Cold-sprayed Nanocrystalline Al-Zn Coating on Magnesium Alloy Surface
原文传递
导出
摘要 采用冷喷涂工艺制备纳米铝锌涂层。借助SEM手段研究了涂层的组织形貌。对涂层的显微硬度、孔隙率以及涂层与基体的结合强度进行了分析。采用电化学工作站和盐雾试验对涂层的腐蚀性能进行了研究。结果表明,涂层自腐蚀电位明显高于镁合金基体,自腐蚀电流密度明显低于镁合金,能为镁合金提供良好的保护。 Nanocrystalline Al-Zn coating was deposited on magnesium alloy substrate by cold spray process. The microstructure morphology of the coating was researched by SEM. The microhardness, porosity,the bonding of coating and matrix were analyzed. The corrosion properties of the coating were researched by electrochemical workstation and neutral salt spray experiment. The results show that the self corrosion potential of the coating is higher than that of Mg alloy matrix. The self corrosion current density is obviously lower than that of Mg alloy, which can provide good protection for Mg alloy.
作者 贾利 崔烺 郑子云 李经纬 JIA Li CUI Lang ZHENG Ziyun LI Jingwei(Ningbo Branch of China Academy of Ordnance Science, Ningbo 315103, China)
出处 《热加工工艺》 CSCD 北大核心 2017年第2期137-138,共2页 Hot Working Technology
基金 宁波市自然科学基金项目(2014A610058) 宁波市科技创新团队项目(2014B82001)
关键词 镁合金 冷喷涂 纳米铝锌涂层 耐腐蚀性能 magnesium alloy cold spray nanocrystalline Al-Zn coating corrosion resistance
  • 相关文献

参考文献2

二级参考文献33

  • 1王安安.在纯镁上激光熔敷镁铝合金提高表面的耐蚀性[J].应用激光,1997,46(6):244-248.
  • 2GRUJICIC M, ZHAO C L, DEROSSET W S, et al. Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process[J]. Materials & Design, 2004,25 (8) : 681 - 688.
  • 3DYKHUIZEN R C, SMITH M F. Gas dynamic principles of cold spray[J]. Journal of Thermal Spray Technology, 1998, 7 (2): 205-212.
  • 4ASSADI H, GARTNER F, STOLTENHOFF T, et al. Bonding mechanism in cold gas spraying [J]. Acta Materialia, 2003, 51 (15) : 4379-4394.
  • 5GRUJICIC M, SAYLOR J R, BEASLEY D E, et al. Computa tional analysis of the interracial bonding between feed-powder par ticles and the substrate in the cold-gas dynamic-spray proces[J]. Applied Surface Science,2003,219 (3-4) : 211-227.
  • 6GARTNER F, STOLTENHOFF T, SCHMIDT T, et al. The cold spray process and its potential for industrial applications[J]. Journal of Thermal Spray Technology, 2006,15(2) :223-232.
  • 7LI Chang jiu, LI Wen ya, WANG Yu-yue, et al. A theoretical model for prediction of deposition efficiency in cold spraying[J]. Thin Solid Films,2005,489(1-2) :79-85.
  • 8LEE H Y, JUNG S H, LEE Y, et al. Alloying of cold-sprayed Al-Ni composite coatings by post-annealing[J].Applied Surfaee Science,2007, 253(7): 3496-3502.
  • 9GRUJICIC M, ZHAO C L, TONG C, et al. Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray process[J]. Materials Science & Engineering A, 2004,368 (1 - 2) :222-230.
  • 10MORGAN R, FOX P, PATTISON J, et al. Analysis of cold gas dynamically sprayed aluminium deposits[J]. Materials Letters, 2004,58(7-8) :1317-1320.

共引文献55

同被引文献78

引证文献8

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部