期刊文献+

Adaptive fuzzy integral sliding mode pressure control for cutter feeding system of trench cutter

Adaptive fuzzy integral sliding mode pressure control for cutter feeding system of trench cutter
下载PDF
导出
摘要 A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of CFS is subjected to unknown load characteristics of rock or soil; in addition,the geological condition is time-varying.Due to the complex load characteristics of rock or soil,the feeding velocity of TC is related to geological conditions.What is worse,its dynamic model is subjected to uncertainties and its function is unknown.To deal with the particular characteristics of CFS,a novel adaptive fuzzy integral sliding mode control(AFISMC) was designed for feeding pressure control of CFS,which combines the robust characteristics of an integral sliding mode controller and the adaptive adjusting characteristics of an adaptive fuzzy controller.The AFISMC feeding pressure controller is synthesized using the backstepping technique.The stability of the overall closed-loop system consisting of the adaptive fuzzy inference system,integral sliding mode controller and the cutter feeding system is proved using Lyapunov theory.Experiments are conducted on a TC test bench with the AFISMC under different operating conditions.The experimental results demonstrate that the proposed AFISMC feeding pressure controller for CFS gives a superior and robust pressure tracking performance with maximum pressure tracking error within ?0.3 MPa. A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of CFS is subjected to unknown load characteristics of rock or soil; in addition,the geological condition is time-varying.Due to the complex load characteristics of rock or soil,the feeding velocity of TC is related to geological conditions.What is worse,its dynamic model is subjected to uncertainties and its function is unknown.To deal with the particular characteristics of CFS,a novel adaptive fuzzy integral sliding mode control(AFISMC) was designed for feeding pressure control of CFS,which combines the robust characteristics of an integral sliding mode controller and the adaptive adjusting characteristics of an adaptive fuzzy controller.The AFISMC feeding pressure controller is synthesized using the backstepping technique.The stability of the overall closed-loop system consisting of the adaptive fuzzy inference system,integral sliding mode controller and the cutter feeding system is proved using Lyapunov theory.Experiments are conducted on a TC test bench with the AFISMC under different operating conditions.The experimental results demonstrate that the proposed AFISMC feeding pressure controller for CFS gives a superior and robust pressure tracking performance with maximum pressure tracking error within ?0.3 MPa.
出处 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第12期3302-3311,共10页 中南大学学报(英文版)
基金 Project(2012AA041801)supported by the High-tech Research and Development Program of China
关键词 electro-hydraulic system cutter feeding system feeding pressure control adaptive fuzzy integral sliding mode control 自适应模糊控制器 压力控制器 滑模控制器 模糊积分 进给系统 Lyapunov稳定性理论 刀具 自适应模糊推理系统
  • 相关文献

参考文献3

二级参考文献49

  • 1Jiao Z X, Gao J X, Hua Q, et al. The velocity synchro- nizing control on the electro-hydraulic load simulator. Chinese Journal of Aeronautics 2004; 17(1): 39-46.
  • 2Nam Y, Hong S K. Force control system design for aerodynamic load simulator. Control Engineering Prac- tice 2002; 10(5): 549-558.
  • 3Li Y H. Development of hybrid control of electrohy- draulic torque load simulator. Journal of Dynamic Systems Measurement and Control 2002; 124(3): 415-419.
  • 4Zhou J. Control strategy of the synchrodrive elec- tro-hydraulic servo system. Proceedings of Interna- tional Conference on Fluid Power, 2006; 365-367.
  • 5Wu S L. Study on control of twin-hydraulic motor synchrodrive system. Chinese Journal of Mechanical Engineering 1993; 6(3): 165-170.
  • 6Liu C N. The optimized design theory of hydraulic servo system. Beijing: Metallurgical Industry Press, 1989. [in Chinese].
  • 7Yao J Y, Shang Y X, Jiao Z X. The velocity feed-forward and compensation on eliminating extra torque of electro-hydraulic load simulator. Proceedings of the Seventh International Conference on Fluid Power Transmission and Control, 2009; 462-465.
  • 8Plummer A R. Control techniques tbr structural testing: a review. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control En- gineering 2007; 221(12): 139-167.
  • 9Chantranuwathana S, Peng H. Adaptive robust force control for vehicle active suspensions. International Journal of Adaptive Control and Signal Processing 2004; 18(2): 83-102.
  • 10Mare J C. Dynamic loading systems for ground testing of high speed aerospace actuators. Aircraft Engineering and Aerospace Technology 2006; 78(4): 275-282.

共引文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部