期刊文献+

鼓泡型箔片动压止推气体轴承结构变形的数值研究 被引量:3

Numerical Study of Structural Deformation of Foil Hydrodynamic Thrust Gas Bearings with Hemispherical Convex Dots
下载PDF
导出
摘要 针对鼓泡型箔片动压止推气体轴承的结构特点,应用ANSYS软件建立弹性支承结构的有限元模型,并对其进行数值求解。在不考虑顶层平箔片变形的情况下,分析单个鼓泡尺寸变化对其支承刚度的影响,建立轴承模型并在对顶层平箔片施加通过有限差分法求解得到的气膜压力后,求解获得平箔片和鼓泡箔片的变形情况。结果表明:通过减小鼓泡半径、跨距以及增大箔片的厚度能够提高鼓泡弹性支承结构的刚度;顶层平箔片在鼓泡型弹性箔片元件的变形中起主要作用,而且弹性箔片元件的变形量能够满足润滑层最小气膜间隙的要求。 Aimed at the structural characteristics of foil hydrodynamic thrust gas beating with hemispherical convex dots, a finite element model of the elastic foundation was established and solved by using ANSYS software.The influence of changing size of a single hemispherical convex dot on its stiffness was firstly analyzed by ignoring the deformation of top foil, and the model of the bearing was built and solved by finite difference method to obtain the film pressure.The deforma- tions of top foil and the foil with hemispherical convex dots were obtained by applying the film pressure obtained by finite difference method.The results indicate that the structural stiffness of elastic foundation is increased by reducing the radius or the span of hemispherical convex dot or increasing the foil thickness.The top foil plays a major role in the deformation of the elastic foil element, and the amount of the deformation of the elastic foil element can meet the requirement of minimal film thickness of bearing lubricant layer.
作者 卢攀 周权 陈汝刚 LU Pan ZHOU Quan CHEN Rugang(School of Environmental and Municipal Engineering, Xi' an University of Architecture and Technology, Xi' an Shaanxi 710055, China School of Energy and Power Engineering, Xi' an Jiaotong University, Xi' an Shaanxi 710049, China)
出处 《润滑与密封》 CAS CSCD 北大核心 2017年第1期91-96,共6页 Lubrication Engineering
基金 国家自然科学基金项目(51105293)
关键词 结构刚度 止推气体轴承 鼓泡型箔片 structural stiffness thrust gas bearing hemispherical convex dots
  • 相关文献

参考文献2

二级参考文献15

  • 1林韶宁,姚艳霞,朱朝辉,侯予,陈纯正.新型弹性箔片动压气体止推轴承启停性能的研究[J].润滑与密封,2005,30(1):28-30. 被引量:4
  • 2陈伟武,张鸿兴.推力波箔轴承的理论分析和试验研究[J].上海机械学院学报,1989,11(3):95-110. 被引量:1
  • 3周权,侯予,崔明现,陈纯正.新型弹性箔片动压气体止推轴承的理论研究[J].西安交通大学学报,2006,40(9):1032-1035. 被引量:5
  • 4ETSION I, GREEN I. Dynamic analysis of a cantilever-mounted gas-lubricated thrust bearing[J]. ASME Journal of Imbrication Technology, 1981,103( 1):157- 163.
  • 5SALEHI M, HESHMAT H, WALTON J F.Advancements in the structural stiffness and damping of a large compliant foil bearing: an experimental study [J]. ASME Journal of Engineering for Gas Turbines and Power, 2007,129(1):154-161.
  • 6IORDANOFF I, STEFAN P, BOUDET R, et al. Dynamic analysis of a thrust bearing: effect of misalignment and load [J]. Journal of Engineering Tribology, 1995, 209(3):189-194.
  • 7DYKAS B, BRUCKNER R, PRAHI. J. Preliminary experimental characterization of the gas film in foil thrust hearings[C]// Proceedings of STLE/ASME International Joint Tribology Conference. New York, USA:ASME, 2006:1367-1368.
  • 8CHEN Chunzheng, YAO Hai, WU Yinongo Experimental study of self-acting gas-lubricated tilting-pad thrust hearings for cryogenic turbo expander [C]// Proceedings of 16th International Cryogenic Engineering Conference. Dirac House, England: Iop Publishing Ltd. , 1996:217-220.
  • 9CHEN Chunzheng, WU Gang, XIONG Lianyou. The study of a small air refrigerator with plate foil aerodynamic bearings turboexpander [C] // Proceedings of 17th International Cryogenic Engineering Conference. Dirac House, England: Iop Publishing Ltd. , 1998: 193-197.
  • 10ZHOU Quan, HOU Yu, CHEN Chunzheng. Dynamic stability experiments of compliant foil thrust bearing with viscoelastic support[J].Tribology International, 2009,42(5) : 662-665.

共引文献17

同被引文献17

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部