期刊文献+

棕榈酸/膨胀石墨复合相变材料的制备及性能研究 被引量:7

Preparation and Thermal Performance of Palmitic Acid/Expanded Graphite Composite Phase Change Materials
原文传递
导出
摘要 棕榈酸是有机固液相变材料,本文通过添加膨胀石墨对其性能进行改善并采用扫描电镜(SEM)、差示扫描量热仪(DSC)、充/放热性能测试对制备出的膨胀石墨质量分数分别为1%,3%,5%,8%的棕榈酸/膨胀石墨复合相变储能材料的结构及热性能进行表征。结果表明,棕榈酸/膨胀石墨复合相变材料保持了膨胀石墨原来疏松多孔的蠕虫状结构,其相变温度与棕榈酸相似,相变潜热与对应质量含量下的棕榈酸相当;随着膨胀石墨添加量的增多,受到黏度和自然对流双重作用的影响,复合相变材料的蓄放热速率先减小后增大,因此适量的膨胀石墨可改善棕榈酸的传热性能。 Palmitic acid(PA) is a kind of organic solid-liquid phase change material.In this paper,the thermal performance of palmitic acid was improved through adding expanded graphite(EG) into it.The structure and phase change properties of prepared palmitic acid/expanded graphite composite phase change materials(PCMs) for thermal storage with EG mass fraction of 1%,3%,5%,8%were characterized via scanning electronic microscope(SEM),differential scanning calorimeter(DSC),and thermal performance tests in a latent heat storage(LHS) system.The results indicate that the PA/EG composite PCMs remain porous and vermiform structure just as that of EG,the phase transition temperature of the composites is close to that of PA and the latent heat is equivalent to the calculated value based on the mass fraction of PA in the composites.Considering the influence of viscosity and natural convection during the phase transformation processes of the composite PCMs,the heat storage and release rate of the composites decreases firstly and then increases rapidly with expansion of EG addictive.
出处 《工程热物理学报》 EI CAS CSCD 北大核心 2017年第3期464-469,共6页 Journal of Engineering Thermophysics
基金 中央高校基本科研业务费专项资金(No.WK2090130016)
关键词 棕榈酸 膨胀石墨 复合相变材料 热性能 Palmitic acid Expanded graphite Composite PCMs Thermal properties
  • 相关文献

参考文献5

二级参考文献54

  • 1GAO DongYan,CHEN ZhenQian,SHI MingHeng,WU ZhiShen.Study on the melting process of phase change materials in metal foams using lattice Boltzmann method[J].Science China(Technological Sciences),2010,53(11):3079-3087. 被引量:9
  • 2曹乃珍,沈万慈,金传波.膨胀石墨吸附有机化合物的极性效应[J].化学通报,1996(10):43-44. 被引量:2
  • 3[1]Zalba B, Marin J M, Cabeza L F, et al. Review on thermal energy storage with phase change : material, heat transfer analysis and applications[J]. Applied Thermal Engineering,2003, 23: 251-283.
  • 4[2]Bo H, Fredrik S. Technical grade paraffin waxes as phase change materials for cool thermal storage and cool storage systems capital cost estimation[J]. Energy Conversion & ManAgement, 2002, 43(13) : 1709-1723.
  • 5[3]Tong X, Khan J, Amin M R. Enhancement of heat transfer by inserting a metal matrix into a phase change material[ J].Numer Heat Transfer, Part A, 1996, 30: 125-141.
  • 6[4]Velraj R, Seeniraj R V , Hafner B, et al. Heat transfer enhancement in a latent heat storage system[J]. Solar Energy,1999, 65: 171-180.
  • 7[5]Cho K, Choi S H. Thermal characteristics of paraffin in a spherical capsule during freezing and melting processes [ J].International Journal of Heat and Mass Transfer, 2000, 43:3183-3196.
  • 8[6]Hawlader M N A, Uddin M S, Khin M M. Microencapsulated PCM thermal-energy storage system [ J ]. Applied Energy,2003, 74: 195-202.
  • 9[7]Hong Y, Shi G X. Preparation of polysthylene-paraffin compound as a form-stable solid-liquid phase change material[ J].Solar Energy Material and Solar Cells, 2000, 64: 37-44.
  • 10[8]Inagaki M, Suwa T. Pore structure analysis of exfoliated graphite using image processing of scanning electron micrographs[J]. Carbon, 2001, 39: 915-920.

共引文献119

同被引文献72

引证文献7

二级引证文献85

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部