摘要
为了改善新型海底管道连接器的密封性能,给出了一种连接器关键结构参数的优化方法.论述了连接器的结构形式和工作原理,建立了以连接器接触压力方差最小化和最大塑性应变最小化为目标的多目标优化模型,运用径向基函数法建立了目标函数、约束变量与设计变量之间的数学模型,给出了连接器关键设计变量的确定方法,推导了临界接触压力均值的表达式.以某连接器为例,计算得到临界接触压力均值为370MPa,给出了影响密封性能的重要结构参数偏距与过盈量的优化方法,优化结果与有限元结果基本相同.最后对优化前后的连接器进行了对比实验,结果表明:优化后的连接器具有较高的承受内压与外载荷的能力,连接器的密封性能得到明显提高.
In order to improve the sealing performance of the novel subsea pipeline connector,the optimization method of the key structure parameters was presented for connector.The structure and working principle of connector were introduced,and the multi-objective optimization model was set up,with contact pressure variance and maximum plastic strain as objective functions.Based on radial basis function,the mathematical models between objective functions,constraint variable and design variables were deduced.Besides,the method of finding the key design variables was provided and the critical mean contact pressure was formulated.Then,for a connector,the critical mean contact pressure is approximately 370 MPa.The optimization method of the set over and interference affecting on sealing performance was provided,in which the result of optimization agrees very closely that of FEM.Finally,the comparative experiments of optimized and non-optimized connectors were carried,which shows that the ability of optimized connectors is much better in both internal pressure and external load,and the performance of connector is improved obviously.
作者
魏宗亮
王立权
关雨
李绍凯
Wei Zongliang Wang Liquan Guan Yu Li Shaokai(College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China)
出处
《华中科技大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2017年第3期40-45,共6页
Journal of Huazhong University of Science and Technology(Natural Science Edition)
基金
国家自然科学基金资助项目(51279042
51105088
51305088)
关键词
连接器
密封
接触压力均值
接触压力方差
径向基函数
多目标优化
connector
seal
mean contact pressure
contact pressure variance
radial basis function
multi-objective optimization
