期刊文献+

内插矩形翼纵向涡发生器的强化传热圆管性能分析 被引量:1

Analysis of Performance of Heat Transfer Enhanced Circular Tube with Rectangular Wings Longitudinal Vortex Generator
下载PDF
导出
摘要 通过三维数值模拟,对不同倾角α下的内插矩形翼纵向涡发生器的强化传热圆管的传热、阻力及综合换热性能(PEC)进行研究,并对其流动及传热机理进行分析。结果表明:在所研究范围内,强化传热圆管的努塞尔数Nu和阻力系数f均高于光管,其努塞尔数比光管提高了68%~147.8%,阻力系数比光管提高了159.7%~1 437.9%;随倾角的增大,强化传热圆管的Nu及f持续增大,PEC值持续降低。 The heat transfer,resistance performance and the value of performance evaluation criterion(PEC)of the circular tube with rectangle wings longitudinal vortex generators at different wing angle(α)were studied by 3Dnumerical simulation.The mechanisms of flow and heat transfer were analyzed.The results show that the Nusselt numbers Nuand the friction factors f of the enhanced circular tube are higher than those of the plain tube in the studied range.As compared with the plain tube,the Nusselt numbers Nuof the enhanced circular tube is increased by 68%~147.8%and the friction factor fof the enhanced circular tube is increased by 159.7%~1 437.9%;The Nusselt number Nuand the friction factor fare consistently increased while the value of performance evaluation criterion PEC is consistently decreased with increasing wing angle.
出处 《太原理工大学学报》 CAS 北大核心 2017年第2期169-173,共5页 Journal of Taiyuan University of Technology
基金 国家自然科学基金资助项目:基于纵向涡的倾斜折流片支撑多管束受限外流的传热强化机理和热流传输规律研究(U1510136)
关键词 矩形翼 强化传热 流动 数值模拟 rectangular wings heat transfer enhancement fluid flow numerical simulation
  • 相关文献

参考文献6

二级参考文献54

共引文献74

同被引文献7

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部