摘要
自吸泵的自吸过程是一个很复杂的气液两相混合流动与分离过程。本文利用非稳态数值模拟方法模拟自吸泵自吸过程,初始条件为进水管及出水管含有部分空气,然后估算自吸时间。模拟结果表明:泵吸气和排气主要集中在自吸初期,期间叶轮入口和泵出口气含率最高分别可达62.4%和45.3%;叶轮入口气含率变化较泵出口气含率变化剧烈;此外,叶轮与导叶间隙对自吸性能有影响,间隙与自吸时间呈负相关变化,说明较大的间隙有利于泵的自吸。
The self-priming process o f self-priming pump was a very complicated g a s - l iquid mixed flow and separation process. In this article, a unsteady numerical simulation was applied to simulated the self-priming process of self-priming pump,with the initial condition was that the inlet and outlet pipe filled with air, and then self-priming time was estimated; The simulation results showed that gas inhaled into and discharged of the pump were mainly concentrated in the early stage of the self-priming process,the air void fraction reached up to 62. 4% and 45. 3% , r e s p e c t i v e l y at t h e i m p e l l e r inlet and t h e pump o u t l e t in t h e initial stage;The change of air void fraction in the impeller inlet was more drastic than that of the pump outlet; In addition, self-priming performance was affected by the gap between impeller and guide vane, and the data showed a negative correlation between gap and self-priming time,which revealed the lager gap was beneficial to self-priming of the pump.
出处
《华东理工大学学报（自然科学版）》
CAS
CSCD
北大核心
2017年第2期280-285,共6页
Journal of East China University of Science and Technology
关键词
自吸泵
自吸过程
气液两相流
非稳态数值模拟
self-priming pump
s e l f - p r i m i n g p r o c e s s
g a s - l i q u i d t w o - p h a s e f l o w
u n s t e a d y numerical simulation
