期刊文献+

多机器人欠约束绳牵引系统静平衡工作空间分析 被引量:1

Analysis of Static Equilibrium Workspace for Under-constrainted Cable-driven System with Multi-robots
原文传递
导出
摘要 由于多机器人绳牵引负载的欠约束系统,不满足力封闭条件,同时方程组一般不相容,无法求出准确的工作空间。建立了系统的静平衡方程,提出利用最小二乘法原理结合蒙特·卡罗方法,对负载低速或准静态运动时,能够快速求出其近似静平衡工作空间,并分别利用法方程和QR分解给出了绳拉力的表达式。在机器人的位置和负载的位姿不发生力旋量失效的情况下,其有唯一的最小二乘解。通过仿真验证了该方法的有效性,利用该方法可快捷地求出不同空间构型的欠约束绳牵引系统的静平衡工作空间,为系统规划与控制的研究提供了基础。 For the under-constrainted system that multi-robots tow the payload by cables, which does not meet the condition of force closure and equations are generally not compatible, so the accurate workspace can't be found out. The static equilibrium equation of the system was established, and then the least squares principle combined with the Monte-Carlo method was put forward. When the movement is low speed or quasi static for the payload, the approximate static equilibrium workspace can be found out quickly and the expression of the cable tension is given by using the normal equations and QR decomposition respectively. When position of robots and position and pose of the payload happen that the wrench isn't failed, there is the unique least square solution.The effectiveness of the proposed method was validated by computer simulation, the method can be used to quickly find out static equilibrium workspace of the under-constrainted cable-driven system for different space configuration, which provides the foundation to the research of planning and control for the system.
作者 赵志刚 李巍 李有德 王砚麟 马延 Zhao Zhigang Li Wei Li Youde Wang Yanlin Ma Yan(School of Mechatronic Engineering, Lanzhou Jiaotong University, Lanzhou 730070, Chin)
出处 《系统仿真学报》 CAS CSCD 北大核心 2017年第4期708-713,共6页 Journal of System Simulation
基金 国家自然科学基金(51265021) 高等学校博士学科点专项科研基金(20126204120004) 教育部科学技术研究重点项目(212184) 甘肃省自然科学基金(1212RJZA067)
关键词 欠约束 静平衡 工作空间 仿真 under-constrainted static equilibrium workspace simulation
  • 相关文献

参考文献5

二级参考文献44

  • 1刘雄伟,郑亚青.6自由度绳牵引并联机构的运动学分析[J].机械工程学报,2002,38(z1):16-20. 被引量:29
  • 2刘雄伟,郑亚青,林麒.应用于飞行器风洞试验的绳牵引并联机构技术综述[J].航空学报,2004,25(4):393-400. 被引量:38
  • 3郑亚青,刘雄伟.绳牵引并联机构拉力分布优化[J].机械工程学报,2005,41(9):140-145. 被引量:13
  • 4郑亚青,刘雄伟,林麒.绳牵引并联机构奇异性分析及无奇异机构设计[J].机械工程学报,2006,42(2):57-62. 被引量:14
  • 5MING A, HIGUCHI T. Study on multiple degree of freedom positioning mechanisms using wires(part 1): Concept, design and control[J]. International Journal of the Japan Society for Precision Engineering, 1994, 28(2): 131-138.
  • 6ALBUS J, BOSTELMAN R, DAGALAKIS N. The NIST robocrane[J]. Journal of Robotic Systems, 1993, 10(5): 709-724.
  • 7DEKKER R, KHAJEPOUR A, BEHZADIPOUR S. Design and testing of an ultra-high-speed cable robot[J]. International Journal of Robotics and Automation, 2006, 21(1): 25-33.
  • 8NING Kejun, ZHAO Mingyang, LIU Jie. A new wiredriven three degree-of-freedom parallel manipulator[J]. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 2006, 128(3): 816-819.
  • 9MA Ou, DIAO Xiumin. Dynamics analysis of a cabledriven parallel manipulator for hardware-in-the-loop dynamic simulation[C]// Proceedings of the 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July24-28, 2005, Monterey, California. USA. Piscataway: Institute of Electrical and Electronics Engineers, 2005: 837-842.
  • 10DUAN Baoyan. A new design project of the line feed structure for large spherical radio telescope and its nonlinear dynamic analysis[J]. Mechatronics, 1999, 9(1): 53-64.

共引文献55

同被引文献8

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部