摘要
在 NCU PP技术沉积的 Ti N- Mo S2 / Ti N复合膜中添加 A1元素并改变部分沉积工艺 ,可以在 1Cr18Ni9Ti基体上沉积出 Ti Al N - Mo S2 / Ti Al N硬质润滑膜 .利用 SEM,XPS等手段研究涂层的成分、微观结构等 .通过摩擦学试验测定其结合强度等性能 .结果表明 ,在钻头上沉积 Ti Al N- Mo S2 / Ti Al N硬质膜 ,可使其在钻削过程中具有优异的耐磨、减摩和耐高温等性能 。
By adding Al element to TiN MoS 2/TiN composite coatings deposited with the NCUPP technology and partially changing the processes, TiAlN MoS 2/TiAlN rigid composite coatings were deposited on stainless steel. Composition and microstructure of the coatings were studied by SEM and XPS. Bonding strength of the coatings was analyzed by tribological tests. Through depositing TiAlN MoS 2/TiAlN rigid coatings on drills, its frictional, wearing and high temperature resistance performances in the drilling process were seen to be improved evidently. Accordingly, abrasion durability of the cutting tools was advanced markedly.
出处
《北京理工大学学报》
EI
CAS
CSCD
北大核心
2002年第4期457-459,468,共4页
Transactions of Beijing Institute of Technology
基金
国家"8 63"计划项目 (GF970 3 0 5 )