期刊文献+

超高压反应器自增强处理的理论与模拟研究

Theoretical and FEA Study on Autofrettage of Ultrahigh Pressure Tubular Reactor
下载PDF
导出
摘要 超高压反应器长期在高温、高压的严酷条件下服役,受到压力波动、腐蚀因素的影响,一旦发生泄漏、爆炸事故,将造成严重的人员伤亡和重大的财产损失。本文通过理论计算与有限元模拟分析,针对某石化厂的现役超高压聚乙烯管式反应器,研究其自增强处理前、后,工况条件下反应器沿壁厚方向当量应力的变化规律,并利用安全系数,量化评估自增强处理对反应器安全性的影响。 The ultra-high-pressure polyethylene reactor is operated under the complex and harsh working conditions. It is affected by high temperature, high pressure, pressure fluctuation and corrosion. If the ultra- high- pressure polyethylene reactor explodes or leaks, it will cause serious casualties and significant economic losses. The nonlinear finite element analysis (FEA) was used to analyze the autofrettage process of 18 year under service UHP polyethylene reactors in a petrochemical plant. And the equivalent stress change was obtained. The autofrettage effect was evaluated by using the yield stress and safety factor.
机构地区 华南理工大学
出处 《广州化工》 CAS 2017年第11期26-27,47,共3页 GuangZhou Chemical Industry
关键词 超高压反应器 非线性有限元模拟 自增强 安全系数 ultra-high pressure tubular reactor nonlinear finite element analysis autofrettage safety factor
  • 相关文献

参考文献3

二级参考文献18

  • 1曾秋成.微机版SUPER SAP有限元分析程序简介[J].马钢科研,1993(1):56-62. 被引量:1
  • 2傅卫国.自增强容器最大弹性许可载荷的最宜超应变度[J].化工装备技术,1995,16(1):33-35. 被引量:2
  • 3.ANSYS帮助TATA公司降低前桥40%重量[R].ANSYS Solution,2003..
  • 4袁明武.我国计算力学软件的现状与思考[R].www.ansys.com.cn/技术文献,2003.
  • 5.有限元超收敛理论及应用[R].http://202.197.120.2,2003.
  • 6.应用ANSYS/LS-DYNA进行电视机抗跌落分析[R].www.ansys.com.cn/技术文献,2004.
  • 7Daniel S Pipkinsay,Satya N Atlurib. Applications of the three dimensional method finite element alternating method[J]. Finite Elements in Analysis and Design, 1996 (23):133-153.
  • 8Theofanis Strouboulis, Lin Zhang, Ivo B,abu ska. Generalized finite element method using mesh-based handbooks., application to problems in domains with many voids. Comput[J]. Methods Appl. Mech. Engrg, 2003 (192):3 109-3 161.
  • 9Birgersson F,Finnveden S. Application of the Spectral Finite Element Method to Turbulent Boundary Layer Induced Vibretion of Plates[J]. Journal of Sound and Vibration , 2003,259 (4):873-891.
  • 10Nguyen Dang Hung, Tran Thanh Ngoc. Analysis of cracked plates and shells using"metis" finite element model [J]. Finite Elements in Analysis and Design,2004 (40):855-878.

共引文献58

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部